Read Sharp XL-DAB227NH (serv.man2) User Guide / Operation Manual online
12
XL-DAB227NH
2008/July/30
XL-DAB227/257NH
XL-DAB257NH
Preparation for Use
System connections (continued)
AC power connection
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
Note:
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Unplug the AC power lead from the wall socket if the unit will not be
in use for a prolonged period of time.
Demonstration mode
Remote control
Battery installation
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods of
time. This will prevent potential damage due to battery leakage.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods of
time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to malfunction.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Installing the batteries incorrectly may cause the unit to malfunction.
Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
Open the battery cover and pull up the battery to take out.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button on the remote control. The
unit will enter the low power
consumption mode.
When the unit is in the power
stand-by mode (demonstration
mode), press the X-BASS/DEMO
button on the remote control. The
unit will enter the low power
consumption mode.
To return to the demonstration mode:
When the unit is in the low power consumption mode, press the
X-BASS/DEMO button on the remote control again.
When the unit is in the low power consumption mode, press the
X-BASS/DEMO button on the remote control again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
Wall socket
(AC 220 - 240 V ~ 50 Hz)
(AC 220 - 240 V ~ 50 Hz)
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
1
Open the battery cover.
2
Insert the batteries according to the direction indicated in
the battery compartment (back of the battery cover).
the battery compartment (back of the battery cover).
When inserting or removing the batteries, push them towards the
battery terminals.
3
Close the battery cover.
Click on the first or last page to see other XL-DAB227NH (serv.man2) service manuals if exist.