Read Sharp XL-60 User Guide / Operation Manual online
8
PREPARATION FOR USE
Connect each speaker wire to the SPEAKER termi-
nals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
nals as shown.
Use speakers with an impedance of 4 ohms or
more.
Use of speakers with an impedance less than 4
ohms may damage your unit.
Notes:
●
Connect the wire with the white line to the minus
(-) terminal and the plain wire to the plus (+) ter-
minal.
(-) terminal and the plain wire to the plus (+) ter-
minal.
●
Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.
wiring when connecting the speakers to the unit.
●
Do not let the bare speaker wires touch each
other as this may damage the amplifier and/or
speakers.
other as this may damage the amplifier and/or
speakers.
●
Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
in the bass reflex ducts.
●
Unplug the AC power lead from the AC socket
before connecting or disconnecting any com-
ponent.
before connecting or disconnecting any com-
ponent.
■
Speaker connection
2
1
3
Right speaker
Left speaker
White
line
line
■
Removing the speaker grilles
1
Remove the lower part of the speaker grille first.
2
Remove the upper part of the speaker grille.
Caution:
When the speaker grilles are removed, the speaker
diaphragms are exposed. Make sure nothing comes
into contact with the speaker diaphragms.
When the speaker grilles are removed, the speaker
diaphragms are exposed. Make sure nothing comes
into contact with the speaker diaphragms.
■
Mounting the speaker grilles
Fit the four posts on the speaker grille into the
mounting holes and push them lightly with the palm
of your hand to secure.
mounting holes and push them lightly with the palm
of your hand to secure.
*60H/70H(SUK)08-12
00.1.5, 11:39 AM
8
Click on the first or last page to see other XL-60 service manuals if exist.