Read Sharp XL-60 User Guide / Operation Manual online
10
15
15
●
When inserting or removing the batteries, push
them towards the
them towards the
ë
battery terminals.
●
Installing the batteries incorrectly may cause the
unit to malfunction.
unit to malfunction.
Precautions for battery use:
●
Insert the batteries according to the direction in-
dicated in the battery compartment.
dicated in the battery compartment.
●
Replace all old batteries with new ones at the
same time.
same time.
●
Do not mix old and new batteries.
●
Remove the batteries if they are weak or if the
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
unit will not be used for long periods of time. This
will prevent potential damage due to battery leak-
age.
Caution:
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
reduced or if the operation becomes erratic.
●
Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit
with a soft cloth.
mote control and the sensor on the main unit
with a soft cloth.
●
Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
light may interfere with operation. Change the
lighting or the direction of the unit.
●
Keep the remote control away from moisture,
excessive heat, shock, and vibrations.
excessive heat, shock, and vibrations.
●
2 “AA” size batteries (UM/SUM-3, R6, HP-7
or similar)
or similar)
●
Batteries are not included.
0.2m - 6m
(8” - 20”)
(8” - 20”)
■
Remote control
(Continued)
■
Volume
MIN 15 MAX
(Main unit operation)
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clock-
wise, the volume will decrease.
When the VOLUME control is turned clockwise, the
volume will increase. When it is turned anti-clock-
wise, the volume will decrease.
(Remote control operation)
Press the VOLUME button to increase the vol-
ume and the VOLUME button to decrease the
volume.
Press the VOLUME button to increase the vol-
ume and the VOLUME button to decrease the
volume.
(Main unit)
(Remote control)
Servo Powered Volume:
●
The jog dial automatically comes out when the
power is turned on, and goes back when the unit
is set to the stand-by mode.
power is turned on, and goes back when the unit
is set to the stand-by mode.
●
When the power is turned on, you can put the
jog dial in and out by pressing the VOLUME
SELECT button.
jog dial in and out by pressing the VOLUME
SELECT button.
Note:
Do not push in the jog dial forcibly with your finger.
Do not push in the jog dial forcibly with your finger.
SOUND CONTROL
*60H/70H(SUK)08-12
00.1.5, 11:39 AM
10
Click on the first or last page to see other XL-60 service manuals if exist.