Read Sharp XL-570E User Guide / Operation Manual online
RECORDING
●
When recording important selections, be sure
to make a preliminary test to ensure that the
desired material is being properly recorded.
to make a preliminary test to ensure that the
desired material is being properly recorded.
●
The ALC (Automatic Record Level Control) cir-
cuit automatically controls the level of the input
signal used for recording.
cuit automatically controls the level of the input
signal used for recording.
●
The VOLUME, BASS and TREBLE controls
may be adjusted with no effect on the recorded
signal. (Variable Sound Monitor)
may be adjusted with no effect on the recorded
signal. (Variable Sound Monitor)
●
Metal and CrO
2
tapes should not be used for
recording.
■
Recording from the built-in CD player
(CD Synchronised Recording System)
(CD Synchronised Recording System)
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "CD" ap-
pears in the display.
pears in the display.
3
Load the desired disc.
●
Use the APMS function to store the tracks you
want to record in memory. (See page 10.)
want to record in memory. (See page 10.)
4
Load a cassette into the cassette compart-
ment.
ment.
5
Press the REC PAUSE button.
●
"REC" will flash.
6
Press the
0
button.
To stop recording:
Press the
■
button.
●
The tape will stop. When the
■
button is
pressed again, the CD will stop.
●
When you press the CD
■
button on the re-
mote control, the CD and tape will stop.
■
Recording from the built-in radio
1
Tune in to the desired station. (See pages 12
- 13.)
- 13.)
2
Load a cassette into the cassette compart-
ment.
ment.
3
Press the REC PAUSE button.
●
"REC" will flash.
Beat cancel switch:
If a whistling noise occurs when recording from
an AM station, press the REC PAUSE (Beat Can-
cel) button repeatedly in the recording stand-by
mode to select A or B, whichever gives the best
reception.
an AM station, press the REC PAUSE (Beat Can-
cel) button repeatedly in the recording stand-by
mode to select A or B, whichever gives the best
reception.
4
Press the
0
button.
To stop recording:
Press the
■
button.
■
Erasing a recorded tape
1
Press the FUNCTION button until "TAPE" ap-
pears in the display.
pears in the display.
2
Press the REC PAUSE button.
●
"REC" will flash.
3
Press the
0
button.
Note:
●
When the REC PAUSE button is pressed in
the recording stand-by mode or whilst re-
cording, it functions as a beat cancel switch
which might be needed when you make re-
cordings from radio stations. (A or B will be
displayed repeatedly.)
Although this is also displayed when you
make recordings from CDs or whilst erasing
a tape, the REC PAUSE button is ineffective
as a beat cancel switch at those times.
the recording stand-by mode or whilst re-
cording, it functions as a beat cancel switch
which might be needed when you make re-
cordings from radio stations. (A or B will be
displayed repeatedly.)
Although this is also displayed when you
make recordings from CDs or whilst erasing
a tape, the REC PAUSE button is ineffective
as a beat cancel switch at those times.
1
5
2
6
4
3
4
2
XL-560E/XL-570E(SUK) TINSE0019SJZZ
14
Click on the first or last page to see other XL-570E service manuals if exist.