Read Sharp XL-570E User Guide / Operation Manual online
RADIO OPERATION
■
Tuning
1
Press the ON/STAND-BY button to turn the
power on.
power on.
2
Press the FUNCTION button until "FM" or "AM"
appears in the display.
appears in the display.
3
Press the BAND button to select the desired fre-
quency band. (FM ST, FM or AM)
quency band. (FM ST, FM or AM)
4
Press the TUNING (
X
or
W
) button to tune in
to the desired station.
Manual tuning:
Press the TUNING (
X
or
W
) button as many times
as required to adjust the frequency shown on the
display to the frequency of the desired station.
display to the frequency of the desired station.
Auto tuning:
When the TUNING (
X
or
W
) button is pressed for
more than 0.5 seconds, scanning will start automat-
ically and the tuner will stop at the first receivable
broadcast station.
ically and the tuner will stop at the first receivable
broadcast station.
Notes:
●
When radio interference occurs during auto scan
tuning, auto scan tuning may stop automatically at
that point.
tuning, auto scan tuning may stop automatically at
that point.
●
If a weak station signal is found during auto scan
tuning, the station will be skipped.
tuning, the station will be skipped.
●
To stop the auto tuning, press the TUNING (
X
or
W
) button again.
5
To receive an FM stereo transmission, press the
BAND button so that the "ST" indicator on the
display lights up.
BAND button so that the "ST" indicator on the
display lights up.
●
"
j
" will appear when an FM broadcast is in ste-
reo.
6
If the FM reception is weak, press the BAND but-
ton so that the "ST" indicator goes out.
ton so that the "ST" indicator goes out.
●
The reception changes to monaural, the sound be-
comes clearer.
comes clearer.
Note:
●
The last station tuned in will be recalled, even after
changing the tuning band or the function, or after
switching the unit to the stand-by mode.
changing the tuning band or the function, or after
switching the unit to the stand-by mode.
■
Preset tuning
You can store up to 30 stations in memory (30
stations consisting of any combination of FM and
AM stations you like) and recall them at the push
of a button.
stations consisting of any combination of FM and
AM stations you like) and recall them at the push
of a button.
To enter stations into memory:
1
Perform steps 1 - 6 in the "Tuning" section.
2
Press the MEMORY/SET button.
●
"MEMORY" will flash.
3
Within 5 seconds, turn the jog dial to make
the preset channel number flash in the dis-
play.
the preset channel number flash in the dis-
play.
●
Store the stations in memory, in order, starting
with preset channel 1.
with preset channel 1.
4
Within 5 seconds, press the MEMORY/SET
button to store that station in the selected sta-
tion preset number memory.
button to store that station in the selected sta-
tion preset number memory.
●
If the "MEMORY" and preset number indicators
go out before the station is memorised, repeat
the operation from step 2.
go out before the station is memorised, repeat
the operation from step 2.
5
Repeat steps 1 - 4 to set other preset stations,
or to change a preset station.
or to change a preset station.
After use:
Press the ON/STAND-BY button to enter the
stand-by mode.
stand-by mode.
1
2
3,5,6
4
(Main unit operation)
2,4
3
(Main unit operation)
XL-560E/XL-570E(SUK) TINSE0019SJZZ
12
Click on the first or last page to see other XL-570E service manuals if exist.