Read Sharp XL-570E User Guide / Operation Manual online
Caution:
●
Do not open the CD compartment during play-
back (or whilst paused).
back (or whilst paused).
●
If the disc is damaged, dirty, or loaded upside
down, "NO DISC" or "READ ERR" will appear
in the display.
Clean, replace, or reload the disc properly.
down, "NO DISC" or "READ ERR" will appear
in the display.
Clean, replace, or reload the disc properly.
●
Keep foreign objects out of the CD compart-
ment.
ment.
●
Subjecting the unit to shock or vibration may
cause mistracking.
cause mistracking.
●
When the unit is not being used, be sure to
close the CD compartment. If it is left open, the
lens may become covered with dust and the unit
may not operate properly.
close the CD compartment. If it is left open, the
lens may become covered with dust and the unit
may not operate properly.
●
Playing certain compact discs at a high volume
may cause mistracking. In this case, listen at a
lower volume.
may cause mistracking. In this case, listen at a
lower volume.
●
If TV or radio interference occurs during CD op-
eration, move the unit away from the TV or
radio.
eration, move the unit away from the TV or
radio.
(Continued)
■
APMS (Automatic Programmable
Music Selector)
Music Selector)
●
The CD can be programmed to play the tracks
in any order, or skip certain tracks.
in any order, or skip certain tracks.
1
Load a compact disc and close the CD com-
partment.
partment.
2
Press the MEMORY/SET (MEMORY) button
to prepare for programming.
to prepare for programming.
●
"MEMORY" will flash.
3
Within 30 seconds, turn the jog dial on the
main unit or press the
main unit or press the
3
/
5
or
2
/
4
button on the remote control to select the de-
sired track.
sired track.
4
Press the MEMORY/SET (MEMORY) button.
●
The selected track number and the pro-
grammed playback order will be displayed.
grammed playback order will be displayed.
●
After 2 seconds, the total playing time of the
programmed tracks will be displayed automat-
ically.
programmed tracks will be displayed automat-
ically.
5
Repeat steps 3 - 4 for any other track Up to
20 tracks can be programmed.
20 tracks can be programmed.
●
If you make a mistake whilst in the program-
ming mode (when MEMORY is flashing) or if
you change your mind, the programmed tracks
can be cleared by pressing the CLEAR button
on the remote control. The tracks will be
cleared sequentially starting with the last en-
tered track.
ming mode (when MEMORY is flashing) or if
you change your mind, the programmed tracks
can be cleared by pressing the CLEAR button
on the remote control. The tracks will be
cleared sequentially starting with the last en-
tered track.
6
Press the
0
/ CD
6
(
0 6
) button to start
playback of programmed selections.
To clear all the programmed selections:
To cancel a programmed sequence, press the
CLEAR button on the remote control whilst the
disc is stopped and the "MEMORY" indicator is
lit.
CLEAR button on the remote control whilst the
disc is stopped and the "MEMORY" indicator is
lit.
Notes:
●
Opening the CD compartment automatically
cancels the programmed sequence.
cancels the programmed sequence.
●
Even if you press the ON/STAND-BY button to
enter the stand-by mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
enter the stand-by mode or the function is
changed from CD to some other function, the
programmed selections will not be cleared.
●
Programming is not possible during CD play-
back. It must be performed whilst the CD is
stopped.
back. It must be performed whilst the CD is
stopped.
●
When in the random play mode (whilst "RAN-
DOM" is lit), programming is not possible.
To perform some programming, cancel the ran-
dom play mode.
DOM" is lit), programming is not possible.
To perform some programming, cancel the ran-
dom play mode.
Selected track number
Playback order
Total playing time
CLEAR
2,4
3
1
6
2,4
6
3
3
XL-560E/XL-570E(SUK) TINSE0019SJZZ
10
Click on the first or last page to see other XL-570E service manuals if exist.