Read Sharp XL-50 Service Manual online
– 7 –
XL-40H/50H
TAPE MECHANISM SECTION
Perform steps 1 to 7 and 9 of the disassembly method to
remove the tape mechanism. (See page 6.)
remove the tape mechanism. (See page 6.)
How to remove the record / playback and erase
heads (See Fig. 7-2.)
heads (See Fig. 7-2.)
1. Remove the screws (A1) x 2 pcs., to remove the erase
head.
2. Remove the screws (A2) x 2 pcs., to remove the record/
playback head.
Note:
After replacing the heads and performing the azimuth
adjustment, be sure to apply screwlock.
After replacing the heads and performing the azimuth
adjustment, be sure to apply screwlock.
How to remove the pinch roller (See Fig. 7-3.)
1. Carefully bend the pinch roller pawl in the direction of the
arrow
<A>
, and remove the pinch roller (B1) x 1 pc.,
upwards.
How to remove the belts (See Fig. 7-4.)
1. Remove the main belt (C1) x 1 pc., from the motor pulley.
2. Remove the FF/REW belt (C2) x 1 pc., from the REW/FF
2. Remove the FF/REW belt (C2) x 1 pc., from the REW/FF
roller.
3. Put on the belts in the reverse order of removal.
Note:
When putting on the belt, ascertain that the belt is not twisted,
and clean it.
Note:
When putting on the belt, ascertain that the belt is not twisted,
and clean it.
How to remove the motor
(See Figs. 7-5.)
(See Figs. 7-5.)
1. Remove the mainbelt.
2. Remove the screws (D1) x 2 pcs., to remove the motor
2. Remove the screws (D1) x 2 pcs., to remove the motor
bracket.
3. Remove the screws (D2) x 3 pcs., to remove the motor.
Note:
When mounting the motor, pay attention to the motor mounting
angle
Note:
When mounting the motor, pay attention to the motor mounting
angle
Figure 7-2
Figure 7-3
Figure 7-4
Figure 7-5
<A>
Pinch Roller
(B1)x1
(B1)x1
Pinch Roller
Pawl
Pawl
REMOVING AND REINSTALLING THE MAIN PARTS
Main Belt
(C1)x1
(C1)x1
FF/REW Belt
(C2)x1
(C2)x1
REW/FF
Clutch
Clutch
Motor
1
Speaker
1. Front panel .......... (A1) x1
7-1
2. Screw .................. (A2) x4
STEP
REMOVAL
PROCEDURE
FIGURE
CP-XL40H/50H
Figure 7-1
(A2)x4
ø4x12mm
ø4x12mm
(A1x1)
Woofer
Speaker Box
Driver
Direction of handle
Driver should be
pried away from
speaker Box.
pried away from
speaker Box.
Erase Head
Record/
Playback Head
Playback Head
(A1)x2
ø2x8mm
ø2x8mm
(A2)x1
ø2x3mm
ø2x3mm
(A2)x1
ø2x7mm
ø2x7mm
(D1)x1
ø2x4mm
ø2x4mm
(D2)x3
Special
Screw
Special
Screw
Motor
Bracket
Bracket
Motor
Motor
(D1)x1
ø2x4mm
ø2x4mm
Click on the first or last page to see other XL-50 service manuals if exist.