Read Sharp XL-35 User Guide / Operation Manual online
02/9/11
XL35H_H_E3.fm
E-17
ENGLISH
XL-35H
T
a
p
e
Recor
d
ing
Recording to a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
"
Recording from a CD
To perform programmed recording:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD STOP" appears on
the display.
the display.
When operating with the remote control, press the CD button.
3
Load the desired disc.
4
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
5
Press the
button.
Recording will be paused.
6
Press the
( ) button.
!
CD playback will start in a few seconds after the tape starts.
!
When the playback of the disc is finished, the CD and the
cassette will stop automatically.
cassette will stop automatically.
1
Programme tracks (see page 13).
2
Press the
button.
3
Press the
( ) button.
Click on the first or last page to see other XL-35 service manuals if exist.