Read Sharp XL-35 User Guide / Operation Manual online
02/9/11
XL35H_H_E2.fm
E-14
ENGLISH
XL-35H
8
7
6
5
4
3
2
1
Radio
Listening to the radio
To receive an FM stereo transmission:
Press the FUNCTION (TUNER (BAND)) button to display the "ST"
indicator.
Press the FUNCTION (TUNER (BAND)) button to display the "ST"
indicator.
!
" " will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the FUNCTION (TUNER
(BAND)) button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
(BAND)) button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Press the ON/STAND-BY button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" appears on
the display.
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
(BAND) button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
!
This can be operated by pressing the TUN. ( or ) button
on the remote control.
on the remote control.
!
When radio interference occurs, auto scan tuning may stop
automatically at that point.
automatically at that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING button again.
Click on the first or last page to see other XL-35 service manuals if exist.