Read Sharp XL-35 User Guide / Operation Manual online
02/9/11
XL35H_H_E2.fm
E-15
ENGLISH
XL-35H
Radio
Listening to the memorised station
"
Memorising a station
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
"
To recall a memorised station
"
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
"
To clear a memorised station
1
Perform steps 1 - 3 in "Listening to the radio" on page 14.
2
Press the MEMORY/SET (MEMORY)
button to enter the preset tuning sav-
ing mode.
button to enter the preset tuning sav-
ing mode.
3
Within 5 seconds, press the PRESET
( or ) button to select the preset
channel number.
( or ) button to select the preset
channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEMO-
RY/SET (MEMORY) button to store
that station in memory.
RY/SET (MEMORY) button to store
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
Preset channel
Frequency and frequency band
1
Press the PRESET ( or ) button for more than 0.5 sec-
onds.
onds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired
station is located.
station is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the MEMO-
RY/SET (MEMORY) button.
RY/SET (MEMORY) button.
3
Within 5 seconds, press the CLEAR but-
ton on the remote control.
ton on the remote control.
Click on the first or last page to see other XL-35 service manuals if exist.