XL-1000 (serv.man3) - Sharp Audio User Guide / Operation Manual. Page 23

01/02/19

XL-1000H(H)E3.fm

The connection lead is not included. Purchase a commercially avail-
able lead as shown below.

„

Note:
To prevent hum interference, place this unit away from a television.
 

„

The digital signal from this unit can be recorded by MiniDisc record-
ers, etc.

Note:
Only CD signals can be output.
 

„

z

Before plugging in or unplugging the headphones, reduce the vol-
ume.

z

Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.

z

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME buttons.

White

White

Red

Red

To the line
output socket

To the optical line
input socket

1

Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this 
unit and the video output to a television.

2

Press the ON/STAND-BY button to turn the power on.

3

Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX 
button.

4

Play the VCR, DVD, etc.

1

Remove the DIGITAL OUT socket cover.

2

Use a connection cable for digital recording to connect the unit to 
the OPTICAL IN socket of a MiniDisc recorder, etc.

3

Press the ON/STAND-BY button to turn the power on.

4

Put the MiniDisc recorder, etc. in the recording mode.

5

Play a CD on this unit.