Read Sharp XL-1000 (serv.man3) User Guide / Operation Manual online
ENGLISH
01/1/13
XL-1000H(H)E2.fm
E-18
Ra
d
io
- Lis
te
n
ing t
o
t
h
e
memor
is
ed sta
tion -
Listening to the memorised station
„
Memorising a station
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead discon-
nection.
„
To recall a memorised station
„
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
„
To clear a memorised station
1
Perform the steps 1 - 3 in "Listening to the Radio" on
page 16.
page 16.
2
Press the MEMORY/SET (MEMO-
RY) button to enter the preset tun-
ing saving mode.
RY) button to enter the preset tun-
ing saving mode.
3
Within 5 seconds, press the PRE-
SET ( or ) button to select the
preset channel number.
SET ( or ) button to select the
preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 5 seconds, press the MEMO-
RY/SET (MEMORY) button to store
that station in memory.
RY/SET (MEMORY) button to store
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
Preset channel
Frequency and frequency band
1
Press the PRESET ( or ) button for more than 0.5
seconds.
seconds.
The preset number will flash and the programmed stations will
be tuned in sequentially, for 5 seconds each.
be tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the de-
sired station is located.
sired station is located.
1
Recall the memorised station.
2
Whilst it is displayed, press the
MEMORY/SET (MEMORY) but-
ton.
MEMORY/SET (MEMORY) but-
ton.
3
Within 5 seconds, press the
CLEAR button on the remote con-
trol.
CLEAR button on the remote con-
trol.
Listening to the Radio (See page 16.)
Click on the first or last page to see other XL-1000 (serv.man3) service manuals if exist.