Read Sharp SD-NX10 (serv.man6) Service Manual online
– 39 –
SD-NX10H
1. CD test
Outline: Read-out of the set value after automatic adjustment (for judging difference from initial value)
Forced operation of pickup (Inner/Outer circumference feed)
During the PLAY mode, the number of errors accumulated for 10 seconds (750 frames) is displayed.
During the PLAY mode, the number of errors accumulated for 10 seconds (750 frames) is displayed.
Basic CD operation by CD-PLAY button
During the TEST mode, the display is turned on and the following buttons become effective.
During the TEST mode, the display is turned on and the following buttons become effective.
Operation
1. CD-PLAY: CD operation according to steps
STEP 1: LD ON by pressing CD PLAY button in the stop mode
STEP 2: Focus ON by pressing CD PLAY button in STEP 1
STEP 3: CLV servo ON by pressing CD PLAY button in STEP 2
STEP 4: Tracking servo ON by pressing CD PLAY button in STEP 3
STEP 5: Sub-code readout/display by pressing CD PLAY button in STEP 4
STEP 2: Focus ON by pressing CD PLAY button in STEP 1
STEP 3: CLV servo ON by pressing CD PLAY button in STEP 2
STEP 4: Tracking servo ON by pressing CD PLAY button in STEP 3
STEP 5: Sub-code readout/display by pressing CD PLAY button in STEP 4
* Keep pressing the CD PLAY button for more than 1 second to shift to STEP 5 directly.
2. CD STOP
: To stop the playback operation (shifting from each step to the stop mode)
/ To reset display (during display of coefficient)
3. CD SKIP-UP (TUNING /
)
: Forcible shift in the pickup FWD direction
4. CD SKIP-DOWN (TUNING /
)
: Forcible shift in the pickup REV direction
Sliding is stopped when the PU_IN switch is turned on.
Sliding is stopped when the PU_IN switch is turned on.
5. MD-STOP
: Automatic adjustment (at the present pickup position)
6. POWER
: Canceling the test mode
7. REC MODE
: To read the coefficient register while the CD operation is stopped/
To display the error number during CD playback
8. VOLUME UP/DOWN
: Normal volume control
9. CD/MD OPEN/CLOSE
: Normal open/close operation
10. CD EJECT
: Normal CD eject
Readout of the adjusted value
Press the REC-MODE button during the stop mode to read the following items.
Press the C-STOP button to return to the normal display.
Press the C-STOP button to return to the normal display.
Item
Display
Max
Type
Min
Focus balance
_ _ F B :
× ×
7 F
0 0
8 0
Focus gain
_ _ F G :
× ×
1 F
0 0
E 0
Tracking balance
_ _ T B :
× ×
7 F
0 0
8 0
Tracking gain
_ _ T G :
× ×
1 F
0 0
E 0
Focus offset
F O F F :
× ×
7 F
0 0
8 0
Tracking offset
T O F F :
× ×
7 F
0 0
8 0
RFRP
R F R P :
× ×
7 F
0 0
8 0
Even if the CD-PLAY button is pressed initially, automatic adjustment is not obtained. Press the MD-STOP button in the stop
mode to gain CD-PLAY for automatic adjustment. Thereafter press the CD-STOP button to stop automatic adjustment.
Press the REC-MODE button to display automatically adjusted values.
mode to gain CD-PLAY for automatic adjustment. Thereafter press the CD-STOP button to stop automatic adjustment.
Press the REC-MODE button to display automatically adjusted values.
Readout of error numbers
Press the REC-MODE button during playback to display the number of errors accumulated for 10 seconds (750 frames).
Press the REC-MODE button during ERR display to return to the normal TEST mode display.
Press the REC-MODE button during ERR display to return to the normal TEST mode display.
TNO Display
Time Display
N: Constant speed
H: Double speed
H: Double speed
N
H
H
Click on the first or last page to see other SD-NX10 (serv.man6) service manuals if exist.