Read Sharp SD-NX10 (serv.man6) Service Manual online
SD-NX10H
– 40 –
Double-speed mode
Press the MD-REC button in the stop mode to switch to the double/constant-speed mode cyclically.
During the double-speed mode, a flag mark lights up.
During the double-speed mode, a flag mark lights up.
CD
CD
TNO Display
Time Display
TNO Display
Time Display
STEP NO Display
STEP NO Display
N: NORMAL SPEED
H: HIGH SPEED
H: HIGH SPEED
CD TEST
1. STEP No.: 0 when stopped
[CD] Flickering
2. Time display: Blank from the stop
mode to STEP 4
mode to STEP 4
Coefficient Name
Coefficient
Readout of coefficient
CD
2. MD test mode (Refer to page 23 and after.)
Button used during MD test mode
Button Name
Function
CD PLAY
To feed the menu of the TEST mode (1) (to feed the menu relating to adjustment and EEPROM)
TUNER/BAND
To feed the menu of the TEST mode (2) (to feed the menu mainly relating to continuous playback and recording)
AUX/DEMO
To feed the menu of the TEST mode (3) (to feed the menu of INNER and JUMP SELECT, etc.)
MD REC
To feed the menu of the TEST mode in reverse (to feed the menu in each test mode in reverse)
MD PLAY
To select, determine and start the menu
MD STOP
To stop each test item and to select the next upper menu
MD SKIP-UP (
)
1. Forced slide feeding (FWD) 2. JUMP operation 3. Address setting value up, etc.
MD SKIP-DOWN (
)
1. Forced slide feeding (REV) 2. JUMP operation 3. Address setting value down, etc.
VOLUME UP
1. Forced UNLOAD of DISC 2. Set value UP
VOLUME DOWN
1. Forced LOAD of DISC 2. Set value DOWN
CD STOP
1. To switch laser by EJECT 2. To switch display during continuous playback, etc.
POWER
To operation mode without automatic adjustment
MD EJECT
Normal EJECT operation
Click on the first or last page to see other SD-NX10 (serv.man6) service manuals if exist.