Read Sharp AR-PK6 (serv.man9) User Guide / Operation Manual online
THAT ARE RELATED
TO THE PS3
the maximum benefit from the product.
requirements and cautions sections of the "Operation manual
(for general information and copier operation)".
including this manual, the "Operation manual (for general
information and copier operation)" and operation manuals for any
optional equipment which has been installed.
makes no warranty of any kind with regard to its content. All information included herein is subject to change without
notice. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this
written permission is prohibited, except as allowed under copyright laws.
property of the respective owners.
due to product improvements and modifications.
PostScript compatibility makes it possible to use the machine not only as a printer in Windows, but also as a printer
for the Macintosh. Note that printing from the Macintosh is only possible via a network connection (parallel and USB
connections are not available on the Macintosh).
This manual explains how to install the PS printer driver that comes with the PS3 Expansion Kit (AR-PK6), and
provides information that must be added to the other operation manuals due to the installation of the AR-PK6. When
using the printer function, refer to this manual along with the manuals that come with the machine.
of the software on the CD-ROM or in the machine, you are agreeing to be bound by the terms of the SOFTWARE
The PS3 Expansion kit AR-PK6 can only be installed if the machine has the printer function.
To use the machine as a PostScript-compatible printer in Windows, the PostScript printer driver or PPD file
(PostScript printer description file) must be installed in your computer. These are installed from the Software CD-
ROM that comes with the PS3 Expansion Kit (AR-PK6).
below, the installation procedure is the same as for installing the PCL printer driver that is included with the machine.
Install the PostScript printer driver as explained on pages 4 to 15 of the "SOFTWARE SETUP GUIDE (for printer)".
Please note the following:
GUIDE (for printer)"; however, this screen does not appear during installation from the Software CD-ROM in the
PS3 Expansion Kit (AR-PK6).
(PostScript printer description file), specify the following directory as the location from which the files are to be copied.
(Example: "R" is the CD-ROM drive)
Driver, Printer Status Monitor, Printer Administration Utility, and
other software packages from the CD-ROMs that accompany the
machine and the printer controller.
that allows installation of the PS Display font. Install the PS Display
font as needed.