HT-SB32D (serv.man3) - Sharp Audio Service Manual (repair manual). Page 11

HT-SB32D

2 – 5

Download “SHARPTagWriter.apk” file from SHARP e-Service website and install it to your NFC smartphone. Refer to

your smartphone’s user manual for more detail.

Below is the example on the app installation process for smartphone Samsung GALAXY S4 :
1) Download “SHARPTagWriter.apk” file from SHARP e-Service website to your personal computer (PC).
2) On your smartphone, go to ‘Setting’ → ‘Security’. Check in box for ‘Unknown sources’.
3) Connect your smartphone to your PC using USB cable. If your smartphone is having difficulties or cannot connect to your PC,

you may see a pop-up message on your smartphone. This message requires you to download Samsung desktop software

KIES and install it to your PC. Please go to Samsung website as stated.

4) After your smartphone and PC has connected successfully, move the “SHARPTagWriter.apk” file from your PC into

your smartphone ‘Download’ folder in the phone storage as Figure 1 below :

5) On your smartphone, go to ‘Download’ folder and tap on “SHARPTagWriter.apk” file to install the app as shown in Figure 2.

Figure 1

Figure 2 

6) A message will appear asking if you want to install the app. Tap on ‘Install’ to proceed. When installation is completed,

tap on ‘Open’ to launch the app (refer Figure 3). SHARP Tag Writer main page will be shown in Figure 4 as below.

Figure 3

Figure 4

2. NFC Tag Writing Procedure [ Bluetooth MAC ID scanning ]

Bluetooth MAC ID scanning is an alternative method to rewrite the NFC Tag whenever the writing procedure using

Serial No. is not successful. This writing method requires customer to bring the audio main unit together with the NFC tag

to Service Center. 
Important Note: As an example, below procedures demonstrate this writing method performed on model HT-SB32D SHARP.