Read Sharp HT-SB30 User Guide / Operation Manual online
E-3
Listening to Bluetooth enabled devices (continued)
SURROUND
-
+
SOUND BAR HOME THEATER SYSTEM HT-SB30
ON/STAND-BY SOURCE PAIRING
VOLUME
ON/STAND-BY
PAIRING
Pairing with other Bluetooth
source device
■
Press the ON/STAND-BY button to turn the
power on.
Press the INPUT button to select Bluetooth
function. (PAIRING indicator blinks.)
Press and hold the PAIRING button for 3
seconds or more.
PAIRING indicator blinks quickly. The sound
PAIRING indicator blinks quickly. The sound
bar is now in pairing mode and is ready to be
paired with other Bluetooth source device.
3
Perform pairing procedure on the source
device to detect this sound bar. “SHARP
HT-SB30” will appear in the detected de-
vices list (if available) in the source device.
(Refer the source device operating manual
for details).
Notes:
Notes:
●
Place the devices to be paired within 1 me-
ter (3 feet) of each other when pairing.
●
Some source devices are unable to display
lists of detected devices. To pair this sound
bar with the source device, refer to the
source device operating manual for details.
Select “SHARP HT-SB30” from the source
list. If Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey,
PIN number or Password.
Pairing indicator (blue) will stop blinking
once the sound bar is successfully paired
with the source device. (Pairing informa-
tion is now memorized in the sound bar.)
Some audio source devices may connect with
the sound bar automatically after pairing is
completed, otherwise follow the instructions
in the source device operating manual to start
connection.
Press the play button on remote control
or source device to start Bluetooth con-
nection.
Notes:
If this sound bar or the source device is turned
off before Bluetooth connection is completed,
pairing will not be completed and the pairing
information will not be memorized. Repeat
step 1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5
for each device.
This sound bar can be paired to a maximum
of 8 devices. If subsequent device is paired,
the oldest device paired, will be deleted and
replaced with the new one.
Once a device is ousted or deleted from
the pairing list, the pairing information for
the device is also deleted. To listen to the
sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the de-
vice again.
●
●
●
Click on the first or last page to see other HT-SB30 service manuals if exist.