Read Sharp HT-SB30 User Guide / Operation Manual online
E-
About Bluetooth technology
■
Bluetooth wireless technology is a short-range radio
technology that enables wireless communication
between various types of digital devices, such
as mobile phone or computer. It operates within
a range of about 10 meters (30 feet) without the
hassle of having to use cables to connect these
devices. Since the Bluetooth technology does not
require line of sight between the communicating
devices, it is not necessary to line up the transmit-
ting device and the receiver, as in the case of infra
red technology.
Communication System and Bluetooth Profile
Communication System and Bluetooth Profile
of this sound bar
There are many available Bluetooth Profiles
describing the basic communication methods,
specific functions and uses, to enable communica-
tion between devices.
This sound bar supports the following:
This sound bar supports the following:
Communication System: Bluetooth Specification
version 2.1 Bluetooth + Enhanced Data Rate
(EDR) Profile : A2DP (Advanced Audio Distribu-
tion Profile)
A2DP enables audio streaming from an A2DP
equipped Bluetooth stereo audio source device
(eg mobile phone) to this sound bar. By convert-
ing wireless stereo audio signal to analogue audio
signal, you can enjoy listening to the sound through
this speaker system.
AVRCP (Audio/Video Remote Control Profile) is a
technology that allows a single remote control to
control all Bluetooth enabled Audio Video equip-
ment to which a user has access.
Note:
Note:
For details on how to operate the device to be
connected, refer the operation manual supplied
with the device.
Notes when using unit with a mobile phone
This unit cannot be used to talk over the tele-
phone even when there is a Bluetooth con-
nection made to a mobile phone.
Please refer to the operating manual supplied
with the mobile phone for details on operation
of your mobile phone while transmitting the
sound using a Bluetooth connection.
SURROUND
-
+
SOUND BAR HOME THEATER SYSTEM HT-SB30
ON/STAND-BY SOURCE PAIRING
VOLUME
Audio stream
Bluetooth mobile phone or other
Bluetooth Stereo audio source device
Pairing Bluetooth devices
■
Bluetooth devices need to be initially paired first
before they can exchange data. Once paired, it is
not necessary to pair them again unless:
pairing is made with more than 8 devices.
Pairing can only be made one device at
a time. This sound bar can be paired to a
maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be de-
leted and replaced with the new one.
this sound bar is reset. All pairing information
is deleted when sound bar is reset.
pairing information is deleted while repairing, etc.
On indicators
Status
PAIRING indicator (blue)
Unconnected
Blinks
Pairing mode
Blinks quickly
Connected
Lights up
●
●
●
●
●
Listening to Bluetooth enabled devices
Click on the first or last page to see other HT-SB30 service manuals if exist.