Read Sharp HT-CN410DVH User Guide / Operation Manual online
E-47
HTCN410DVH 8_E2.fm
03/10/29
ENGLISH
HT-CN410DVH
Advanced Features
- Adjusting speaker delay time/speaker level -
Adjusting speaker delay time/speaker level
When speakers cannot be placed at equal distances, change speaker settings to
enjoy surround effects as if they were equally placed.
enjoy surround effects as if they were equally placed.
Example:
If the centre speaker is closer to the listening position than others by about 90 cm, set
as follows.
as follows.
Speaker delay time setting
By adjusting speaker delay time, differences in the speaker distance can be corrected.
This offers you the sound quality as if the speakers are installed at the same distance
from the listening position.
This offers you the sound quality as if the speakers are installed at the same distance
from the listening position.
Notes:
When the listening mode is "STEREO", the delay time cannot be changed.
You cannot change the delay time of the front speakers and the subwoofer.
In the "REAR DELAY" setting, the left and right speakers are adjusted at the same
time, not individually.
You cannot change the delay time of the front speakers and the subwoofer.
In the "REAR DELAY" setting, the left and right speakers are adjusted at the same
time, not individually.
Sound from the centre speaker needs to be delayed for 90 cm. The delay time of 1
ms corresponds to 30 cm. Set the delay time to 3 MS. Sound is heard as if all the
speakers were equally placed.
ms corresponds to 30 cm. Set the delay time to 3 MS. Sound is heard as if all the
speakers were equally placed.
1 In "Speaker delay time setting", set the centre speaker to 3 MS.
2 The centre speaker is closer to the listener than others. In "Speaker level setting",
2 The centre speaker is closer to the listener than others. In "Speaker level setting",
adjust the centre speaker level (see page 48).
3 In "Test tone", check the sound from each speaker (see page 48).
110 cm
200 cm
0
90 cm
Front
speaker (left)
Subwoofer
Front
speaker (right)
speaker (right)
Surround
speaker (left)
speaker (left)
Surround
speaker (right)
speaker (right)
Centre
speaker
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select DVD mode.
3
Press the SETUP button.
4
Press the
8
or
9
button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the
8
or
9
button to select
"CENTER DELAY" or "REAR
DELAY".
6
Press the
:
button and use the
8
or
9
button to select the desired
delay time.
7
To complete the speaker delay time setting, press the SETUP
button.
button.
Speaker type
Delay time range
Default
setting
CENTER DELAY
Centre speaker
1 MS to 5 MS
OFF
REAR DELAY
Surround speaker (L, R)
3 MS to 15 MS
OFF
Click on the first or last page to see other HT-CN410DVH service manuals if exist.