DK-KP85H - Sharp Audio User Guide / Operation Manual. Page 10

Listening to Bluetooth enabled devices (continued)

■

Pairing with other Bluetooth source devices

Press  the  ON/STAND-BY  button  to  turn  the  power 

on.

Press  the  BLUETOOTH  /   button  (remote  control) 

to  select  Bluetooth  function.  (PAIRING  indicator 

blinks.)

Press  and  hold  the  PAIRING  button  for  3  seconds 

or more.
PAIRING indicator blinks quickly. The unit is now in 

pairing  mode  and  is  ready  to  be  paired  with  other 

Bluetooth source device.

Perform pairing procedure on the source device to 

detect  this  unit.  “SHARP  DK-KP85”  will  appear  in 

the detected devices list (if available) in the source 

device.  (Refer  the  source  device  operating  manual 

for details).
Notes:

 

●

Place the devices to be paired within 1 meter (3 
feet) of each other when pairing.

 

●

Some source devices are unable to display lists of 
detected devices. To pair this unit with the source 
device, refer to the source device operating man-
ual for details.

Select  “SHARP  DK-KP85”  from  the  source  list.  If 

Passcode* is required, enter “0000”.

* Passcode may be called PIN Code, Passkey, PIN 

number or Password.

Pairing  indicator  (blue)  will  stop  blinking  once  the 

unit  is  successfully  paired  with  the  source  device. 

(Pairing information is now memorised in the unit.)

Some  audio  source  devices  may  connect  with  the 

unit  automatically  after  pairing  is  completed,  oth-

erwise  follow  the  instructions  in  the  source  device 

operating manual to start connection.

Press the play button on main unit, remote control or 

source device to start audio playback.

 

●

If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.

 

●

To pair with other devices, repeat steps 1 - 5 for each 
device.

 

●

Once a device is ousted or deleted from the pairing list, 
the pairing information for the device is also deleted. To 
listen to the sound from the device again, it needs to be 
re-paired. Perform steps 1 - 5 to pair the device again.

 

●

When Bluetooth device is turned off, “Disconnected” is 

displayed briefly. Pairing LED turns off for a while and 
then will start blinking again.

■

 

●

The source device Bluetooth functionality is ON.

 

●

Pairing of this unit and the source device is completed.

 

●

Unit is in connected mode (pairing indicator (BLUE) lights 
up.)

Press  the  ON/STAND-BY  button  to  turn  the  power 

on.

Press the FUNCTION button to select Bluetooth func-

tion.

Start  the  Bluetooth  connection  from  the  Bluetooth 

stereo audio source device.

Press play button (main unit, remote control or source 

device).

If  the  source  device  has  an  extra  bass  function  or 

equalizer function, set them to off. If these functions 

are on, sound may be distorted.

 

●

You need to make the Bluetooth connection again if:
-  the source device is not turned on, or its Bluetooth func-

tionality is off or is in sleep mode.

 

●

During Bluetooth function, if the Bluetooth connected de-
vice and the one connected to the AUDIO IN are played 
simultaneously, only the Bluetooth sound can be heard.

■

Perform any of the followings.
- Disconnect the Bluetooth connection on the audio source 

device.

  Refer the operating manual supplied with the device.
- Turn off the Bluetooth stereo audio source device.
- Turn off this unit.

The volume of this unit may not be controlled as intended 
depending on the device.