Read Sharp DK-KP85H User Guide / Operation Manual online
13
Listening to a CD or MP3/WMA disc
BLUETOOTH
PAIRING
■
Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD/USB button on the remote control or
FUNCTION button repeatedly on the main unit to select
CD function.
3
Press the OPEN/CLOSE button to open the disc
compartment.
4
Place the disc in the disc compartment, label side front.
5
Press the OPEN/CLOSE button to close the disc
compartment.
6
Press the / (CD / ) button to start playback. After the
last track is played, the unit will stop automatically.
To stop playback:
●
Press the (CD ) button.
Caution:
●
Do not place two discs in the disc compartment.
●
Do not play discs of special shapes (heart, octagon,
etc). It may cause malfunctions.
●
Do not push the disc compartment while it is moving.
●
If the power fails while the compartment is open, wait
until the power is restored.
●
If TV or radio interference occurs during CD operation,
move the unit away from the TV or radio.
●
Be sure to place 8 cm (3”) disc in the middle of the
disc compartment.
●
Due to the structure of the disc information, it takes
longer to read an MP3/WMA disc than a normal CD
(approximately 20 to 90 seconds).
Notes for CD or MP3/WMA disc:
●
Rewritable multi-session discs with unfinished writing,
can still be played.
■
Various disc functions
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback
mode. Press the
/ button to resume
playback from the
paused point.
Stop
Press in the playback
mode.
Track
up/down
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start the
desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
■
Direct track search
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to
select the desired track.
●
The Numeric buttons allow you to select up to number 9.
●
When selecting number 10 or higher, use the “10+” button.
A. For example, to choose 13
1
Press the “10+” button once.
2
Press the “1” button.
3
Press the “3” button.
Selected track
number
B. For example, to choose 130
1
Press the “10+” button twice.
2
Press the “1” button.
3
Press the “3” button.
4
Press the “0” button.
Notes:
●
A track number higher than the number of tracks on
the disc cannot be selected.
●
During random play, direct search is not possible.
Click on the first or last page to see other DK-KP85H service manuals if exist.