DK-KP85H - Sharp Audio User Guide / Operation Manual. Page 9

Read Sharp DK-KP85H User Guide / Operation Manual online

8
 
About Bluetooth technology
Bluetooth wireless technology is a short-range radio technol-
ogy that enables wireless communication between various 
types of digital devices, such as mobile phone or computer. It 
operates within a range of about 10 meters (30 feet) without 
the hassle of having to use cables to connect these devices. 
Since the Bluetooth technology does not require line of sight 
between the communicating devices, it is not necessary to 
line up the transmitting device and the receiver, as in the case 
of infra red technology.
Communication  System  and 
Bluetooth
  Profile  of  this 
unit
There are many available Bluetooth Profiles describing the 
basic communication methods, specific functions and uses, 
to enable communication between devices.
This unit supports the following:
Communication System: Bluetooth Specification version 
2.1 Bluetooth + Enhanced Data Rate (EDR) Profile : A2DP 
(Advanced Audio Distribution Profile)
A2DP enables audio streaming from an A2DP equipped 
Bluetooth  stereo audio source device (eg mobile phone) 
to this unit. By converting wireless stereo audio signal to 
analogue audio signal, you can enjoy listening to the sound 
through this speaker system.
AVRCP (Audio/Video Remote Control Profile) is a technology 
that allows a single remote control to control all Bluetooth en-
abled Audio Video equipment to which a user has access.
Notes when using unit with a mobile phone
 
This unit cannot be used to talk over the telephone even 
when there is a Bluetooth connection made to a mobile 
phone.
 
Please refer to the operating manual supplied with the 
mobile phone for details on operation of your mobile 
phone while transmitting the sound using a Bluetooth 
connection.
Audio stream
Bluetooth mobile phone or other 
Bluetooth Stereo audio source device
 
Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they 
can exchange data. Once paired, it is not necessary to pair 
them again unless:
 
pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This 
unit can be paired to a maximum of 8 devices. If subse-
quent device is paired, the oldest device paired, will be 
deleted and replaced with the new one.
 
this unit is reset. All pairing information is deleted when 
unit is reset.
 
pairing information is deleted while re-pairing, etc.
On indicators
Status
PAIRING indicator (blue)
Unconnected
Blinks
Pairing mode
Blinks quickly
Connected
Lights up
Listening to Bluetooth enabled devices
Page of 32
Display

Click on the first or last page to see other DK-KP85H service manuals if exist.