CD-XP200H - Sharp Audio User Guide / Operation Manual. Page 35

CD-XP200H(H)E3.fm

02/02/21

CD-XP200H

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.

! General

 

! Amplifier

 

! CD player

! Tuner

 

! Cassette deck

 

! Speaker

AC 230 V, 50 Hz

Power on: 128 W

Power stand-by: 0.6 W (*)

Width: 270 mm (10-5/8") 
Height: 330 mm (13") 
Depth: 355 mm (13-15/16")

6.7 kg (14.7 lbs.)

 ( * )

This power consumption value is obtained when the demonstration mode is 
cancelled in the power stand-by mode. Refer to page 8 to cancel the demon-
stration mode.

PMPO: 480 W

MPO: 240 W (120 W + 120 W) (DIN 45 324)

RMS: 150 W (75 W + 75 W) (DIN 45 324)

RMS: 104 W (52 W + 52 W) (DIN 45 500)

Speakers: 6 ohms

Headphones: 16 - 50 ohms (recommended: 32 ohms)

Video/Auxiliary (audio signal): 500 mV/47 k ohms

3-disc multi-play compact disc player

Non-contact, 3-beam semiconductor laser pickup

1-bit D/A converter

20 - 20,000 Hz

90 dB (1 kHz)

FM: 87.5 - 108 MHz

AM: 522 - 1,620 kHz

50 - 14,000 Hz (Normal tape)

55 dB (TAPE 1, playback) 
50 dB (TAPE 2, recording/playback)

0.35 % (DIN 45 511)

2-way type speaker system

5 cm (2") Tweeter

13 cm (5-1/8") Woofer

150 W

75 W

6 ohms

Width: 220 mm (8-11/16") 
Height: 330 mm (13") 
Depth: 222 mm (8-6/8")

3.0 kg (6.6 lbs.)/each