Read Sharp CD-XP200H User Guide / Operation Manual online
E-22
CD-XP200H(H)E3.fm
02/02/21
CD-XP200H
ENGLISH
Advance
d Features
- Usi
n
g the
Radio Da
ta
S
y
stem (RDS
)
-
! To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news, sports, traffic pro-
gramme, etc. ... see page 20) from the stations in memory.
gramme, etc. ... see page 20) from the stations in memory.
Notes:
" If the display has stopped flashing, start again from step 2. If the unit finds a
desired programme type, the corresponding channel number will flash for about 4
seconds, and then the station name will flash for 7 seconds, which will remain lit.
seconds, and then the station name will flash for 7 seconds, which will remain lit.
" If you want to listen to the same programme type of another station, press the
PTY.TI SEARCH button whilst the channel number or station name is flashing.
The unit will look for the next station.
The unit will look for the next station.
" If no station can be found, "NOTFOUND" will appear for 4 seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 4, "TP" will appear. (This does not
mean that you can listen to the traffic information at that time.)
When a traffic information is broadcast, "TA" will appear.
mean that you can listen to the traffic information at that time.)
When a traffic information is broadcast, "TA" will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2, etc.) from the
stations stored in memory.
Before starting this operation, you must store one or more station names in memory.
stations stored in memory.
Before starting this operation, you must store one or more station names in memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the PTY.TI SEARCH button.
"PTY TI" and "SELECT" will appear alternately for about 6 seconds.
3
Within 6 seconds, press the PRESET ( or ) button to select the
programme type.
programme type.
Each time the button is pressed, the programme type will appear. If the button is
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
held down for more than 0.5 seconds, the programme type will appear continu-
ously.
4
Whilst the selected programme type is flashing (within 6 seconds),
press the PTY.TI SEARCH button again.
press the PTY.TI SEARCH button again.
After the selected programme type has been lit for 2 seconds, "SEARCH" will ap-
pear, and the search operation will start.
pear, and the search operation will start.
1
Press the TUNER (BAND) button to select the FM band.
2
Press the PRESET ( or ) button to select a desired station.
3
The station name will be displayed for 6 seconds. Then the display will change as
follows.
follows.
Click on the first or last page to see other CD-XP200H service manuals if exist.