Read Sharp CD-XP110 User Guide / Operation Manual online
02/5/31
CD-XP110H(H)E3.fm
E-24
ENGLISH
8
CD-XP110H
Re
fe
re
nc
es
- Tr
o
uble
s
hoot
in
g
c
h
a
rt -
!
If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
1
Set the unit to the stand-by mode and turn the power on again.
2
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
If neither operation above restores the unit, clear all the memory by
resetting it.
!
Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
mode.
2
Whilst pressing down the TUNER (BAND) button and the DISC
SKIP button, press the ON/STAND-BY button until "CLEAR"
appears.
SKIP button, press the ON/STAND-BY button until "CLEAR"
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
!
Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
!
Before transporting the unit
This unit is equipped with a transport safety screw on the back to
prevent damage during transportation.
prevent damage during transportation.
Caution:
If you tilt the unit forward during transportation without the transport
screw, the disc tray may be slid open. It may damage the unit or CD.
If you tilt the unit forward during transportation without the transport
screw, the disc tray may be slid open. It may damage the unit or CD.
1
Press the ON/STAND-BY button
to turn the power on.
to turn the power on.
2
Remove all discs from the unit
and close the disc tray.
and close the disc tray.
3
Press the ON/STAND-BY button
to enter the stand-by mode.
to enter the stand-by mode.
"
"SHARP" is displayed.
4
When "SHARP" disappears, un-
plug the AC power lead from the
wall socket.
plug the AC power lead from the
wall socket.
5
Insert the transport screw into the
back of the unit and tighten it with
a flat-blade screwdriver or a coin.
back of the unit and tighten it with
a flat-blade screwdriver or a coin.
Click on the first or last page to see other CD-XP110 service manuals if exist.