Read Sharp CD-XP110 User Guide / Operation Manual online
02/5/31
CD-XP110H(H)E2.fm
E-20
ENGLISH
8
CD-XP110H
Tap
e
Re
co
rd
in
g
- Re
co
rd
in
g
t
o
a c
ass
et
te
t
a
p
e
-
!
Recording from the radio
To stop recording:
Press the button of TAPE 1.
Press the button of TAPE 1.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Dubbing from tape to tape
You can record from TAPE 2 to TAPE 1.
To stop dubbing:
Press the button of TAPE 1.
Press the button of TAPE 1.
!
Erasing recorded tapes
Note:
Make sure that the TAPE 2 is not in use.
Make sure that the TAPE 2 is not in use.
1
Tune in to the desired station. (See page 16.)
2
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the button of TAPE 1.
4
Press the button of TAPE 1,
which also engages the but-
ton.
which also engages the but-
ton.
5
Press the button of TAPE 1 again to begin recording.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
"
To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
Side A
Tab for
side B
side B
Tab for
side A
side A
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the TAPE 2 cassette
compartment. Insert a blank tape into the TAPE 1 cas-
sette compartment.
compartment. Insert a blank tape into the TAPE 1 cas-
sette compartment.
It is recommended that the recording tape is the same length as
the master tape.
the master tape.
3
Press the TAPE button.
4
Press the button of TAPE 1.
5
Press the button of TAPE 1, which also engages the
button.
6
Press the button of TAPE 2.
The button of TAPE 1 will be released automatically and dub-
bing from TAPE 2 to TAPE 1 will begin.
bing from TAPE 2 to TAPE 1 will begin.
1
Load the tape to be erased into the TAPE 1 cassette compart-
ment with the side to be erased facing toward you.
ment with the side to be erased facing toward you.
2
Press the TAPE button.
3
Press the button of TAPE 1, which also engages the button
to begin erasing.
to begin erasing.
Click on the first or last page to see other CD-XP110 service manuals if exist.