Read Sharp CD-XP110 User Guide / Operation Manual online
02/5/31
CD-XP110H(H)E2.fm
E-19
ENGLISH
CD-XP110H
Tap
e
Re
co
rd
in
g
- Re
co
rd
in
g
t
o
a c
ass
et
te
t
a
p
e
-
Recording to a cassette tape
Before recording:
"
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
ensure that the desired material is properly recorded.
"
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
from malfunction of this unit.
"
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
the recorded signal (Variable Sound Monitor).
"
For recording, use only normal tapes. Do not use metal or
CrO tapes.
CrO tapes.
Recording can be operated in the TAPE 1 compartment. The TAPE
2 is for playback only.
2 is for playback only.
!
Recording from a CD (CDs)
You can record 3 CDs continuously.
To stop recording:
Press the button of TAPE 1.
Press the button of TAPE 1.
To perform programmed recording:
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
performed.
3
Press the CD button and load the desired disc.
4
Press one of the 1 - 3 buttons on the remote control
to select the disc to be recorded first.
to select the disc to be recorded first.
5
Press the button of TAPE
1, which also engages the
button.
1, which also engages the
button.
CD playback and tape recording will start.
1
Press the CD button.
2
Programme discs and tracks. (See page 15.)
3
Press the button of TAPE 1, which also engages the button.
Click on the first or last page to see other CD-XP110 service manuals if exist.