Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
49
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
■
Timer playback/Timer recording
Before setting the timer:
Whilst the power is in the stand-by mode, press the DISPLAY button
on the remote control to check that the clock is on time.
on the remote control to check that the clock is on time.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the MENU button.
3
Turn the jog dial to select “TIMER PLAY” or “TIMER REC” mode
and within 10 seconds, press the ENTER button.
and within 10 seconds, press the ENTER button.
For timer playback:
For timer recording:
4
“ PLAY” or “ REC” will flash for 5 seconds.
Press the ENTER button during the flash.
or
5
Turn the jog dial to specify the hour to start and within 10 sec-
onds, press the ENTER button.
onds, press the ENTER button.
●
The illustrations show the timer playback setting.
Timer and Sleep Operation
Timer playback:
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
The unit turns on and plays the desired source (CD, MD, tuner, tape) at the
preset time. At the end time, the unit enters the power stand-by mode auto-
matically.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
At the end time, the unit enters the power stand-by mode automatically.
Continued to the next page
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.