Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
43
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Recording to a Cassette Tape from the Radio
1
Tune in to the desired station. (See page 25.)
2
Load a cassette into the compartment with side A facing you.
3
Press the REV. MODE button on the remote control to choose one
side or both sides.
side or both sides.
4
Press the TAPE REC button repeatedly to switch to the side you
record on.
record on.
●
Recording will be paused.
●
To record on both sides, begin on side A. (If recording is started from side B,
the tape will not switch over to side A.)
the tape will not switch over to side A.)
5
Press the
06
06
06
06
06
button to record on side A, or the
1
1
1
1
1
button for
side B.
●
When you press the
06/1 0
button on the remote control, the system will
record on the side specified in step 4.
To interrupt recording:
Press the TAPE REC button.
To resume recording, press the same recording button you pressed in step 5. Other
buttons do not allow resuming.
To resume recording, press the same recording button you pressed in step 5. Other
buttons do not allow resuming.
To stop recording:
Press the
■
button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
■
Erasing recorded tapes
1. Press the TAPE button.
2. Follow steps 2 - 5 in “Recording to a Cassette Tape from the Radio”.
2. Follow steps 2 - 5 in “Recording to a Cassette Tape from the Radio”.
.... To record on both sides.
.... To record on only one side.
.... To record on only one side.
T
ape Recording
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.