Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online
39
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Recording to a MiniDisc from
a Cassette Tape
a Cassette Tape
1
Press the TAPE button and load the cassette. (See page 24.)
2
Load a recordable MiniDisc into the MD compartment. (See page 36.)
3
Press the AUTO MARKER button to select “A.MARK ON” or
“A.MARK OFF”.
“A.MARK OFF”.
If you have selected “A.MARK ON”, the auto mark function will be activated
and a new track number will be created if the sound stops for 1 second or
more. If you have selected “A.MARK OFF”, a recording is performed as a
single track, and only one track number is created.
and a new track number will be created if the sound stops for 1 second or
more. If you have selected “A.MARK OFF”, a recording is performed as a
single track, and only one track number is created.
●
The auto mark function may not work correctly if you record a tape with much noise.
4
Press the MD REC button.
●
The unit will enter the recording stand-by mode.
5
Press the
06
06
06
06
06
button to play back side A, or the
1
1
1
1
1
button for
side B. Recording will start automatically.
●
If the tape or MiniDisc stops, recording will stop.
To stop recording:
Press the
■
button.
The MiniDisc and tape will stop.
About track numbers:
If there is 1 second or more of silence, a new
track number is created automatically.
track number is created automatically.
●
Due to noise, the track numbers may not
be correctly created.
be correctly created.
●
Without using the auto mark function, the
recording can be performed as a single track.
recording can be performed as a single track.
MD Recording
1
Tune into the desired station. (See page 25.)
2
Load a recordable MiniDisc into the MD compartment. (See page 36.)
3
Press the MD REC button.
●
The unit will enter the recording stand-by mode.
4
Press the
06
06
06
06
06
button to start recording.
To interrupt recording:
Press the
06
button.
To resume recording from the same point of MiniDisc, press the
06
button again.
To stop recording:
Press the
■
button.
The MiniDisc will stop.
About track numbers:
A recording is performed as a single track,
and only one number is created.
and only one number is created.
Recording to a MiniDisc from
the Radio
the Radio
MiniDisc
(A. MARK ON)
First track
track
Second
About
1 second
Silence
Tape
Radio
MiniDisc
First track
Second track
Third track
First track
track
Third track
Track A
Track B
Track C
(Track A)
(Track B)
(Track C)
Sec ond
To mark track numbers whilst recording from a tape or the radio:
Press the MD REC button at the desired position during recording to create a new
track number. The track counter will be increased by one every time the button is
pressed.
track number. The track counter will be increased by one every time the button is
pressed.
Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.