CD-MD3000 (serv.man2) - Sharp Audio User Guide / Operation Manual. Page 35

Read Sharp CD-MD3000 (serv.man2) User Guide / Operation Manual online

35
Web-site: www.sharp.co.uk/support    Help Line: 08705 274277 (office hours)
Disc writing (TOC)
The TOC (Table of Contents) is information on
track numbers and recording areas to allow the
unit to recognise musical selections or sounds.
The entire MiniDisc is controlled depending on this
TOC, which enables the unit to find the beginning
of a track quickly or to automatically record in a
vacant area.
When you start recording or editing, “TOC” will appear in the display window.
This indicates that information in the TOC is now being changed according to the
recording or editing being performed. (The changed TOC is not yet recorded on the
MiniDisc at this time.)
The TOC is recorded when
You stop recording.
You switch to another input source.
You eject the MiniDisc.
You enter the stand-by mode.
Do NOT unplug the power lead whilst the TOC is being recorded (“TOC” is flashing)
and do NOT impart shock to the unit. Otherwise, TOC will not be correctly recorded,
and consequently proper playback may not be possible.
Recordings cannot be made in the following situations.
If you try recording on a playback-only MiniDisc (commercially available music MiniDisc).
If a MiniDisc is protected against accidental erasure (See page 54).
If there is no more recording time left on the disc (See page 55).
When the “TOC FULL” message appears (See page 55).
If a disc's TOC has been damaged.
Sampling rate converter
This system is equipped with a sampling rate converter, which automatically converts
the sampling frequencies of the connected digital tuners or DAT decks (32 kHz, 48
kHz) to 44.1 kHz. You can digitally record from equipment with different sampling fre-
quencies.
Before Recording to a MiniDisc
Area for TOC 
(recording track 
numbers, track 
names, etc.)
Area for 
recording the 
sound
“CAN’T COPY” will appear, and no recording
is allowed.
MD Recording
Notes for recording
SHARP is not liable for damage or loss of your recording arising from malfunction
of this unit.
When recording important selections, be sure to make a preliminary test to ensure
that the desired material is being properly recorded.
The VOLUME, X-BASS and EQUALIZER controls can be adjusted with no effect
to the recorded signal (Variable Sound Monitor).
Serial Copy Management System (SCMS)
This player is equipped with a digital copy prevention mechanism which complies with
the SCMS. The SCMS limits the production of digital copies to one generation for
copyright protection. If a digital copy (first generation copy) is made from a copyright-
protected digital source (audio CD or the like), no further digital copying (from the
second generation) is allowed.
The SCMS does not affect analogue recording.
Audio CD
MiniDisc
(1st generation copy)
MiniDisc
(2nd generation copy)
MiniDisc
(2nd generation copy)
Digital recording
Digital connection
Impossible
Possible
Analogue connection
Notes:
When the copyright-protected tracks on a CD-R are recorded to a MiniDisc in this
unit, they will be skipped automatically and the other tracks will be recorded.
Copyright-protected digital source cannot be recorded from any external devices.
Page of 60
Display

Click on the first or last page to see other CD-MD3000 (serv.man2) service manuals if exist.