Read Sharp CD-MD3000 (serv.man12) Service Manual online
CD-MD3000H/CD-MD3000W
– 22 –
Figure 22-1
Figure 22-2
Figure 22-3
Figure 22-4
TAPE MECHANISM SECTION
Perform steps 1 to 4 and 9 of the disassembly method to
remove the tape mechanism.
remove the tape mechanism.
How to remove the record/playback and erase
heads (See Fig. 22-1)
heads (See Fig. 22-1)
playback head and three-dimensional head of the erasing
head can be removed.
head can be removed.
How to remove the pinch roller (See Fig. 22-2)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (B1) x1 pc., in the
direction of the arrow <B>.
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (See Fig. 22-3)
1. Remove the motor.
2. Remove the main belt (C1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (C2) x 1 pc.
2. Remove the main belt (C1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (C2) x 1 pc.
How to remove the motor (See Fig. 22-4)
1. Remove the belt.
2. Remove the screws (D1) x 2 pcs., to remove the motor.
2. Remove the screws (D1) x 2 pcs., to remove the motor.
Pinch
Roller
(B1)x1
Roller
(B1)x1
<A>
Pinch
Roller
Pawl
Roller
Pawl
Pull
<B>
Pull
(Left)
<A>
Pinch
Roller
Pawl
Roller
Pawl
Pull
<B>
Pull
(Right)
(A1)x2
Ø2 x 6mm
Ø2 x 6mm
Record/
Playback
Head
Playback
Head
Erase
Head
Head
How to remove the control panel motor
(See Fig. 22-5)
(See Fig. 22-5)
1. Remove the control panel.
2. Remove the screws (E1) x 6 pcs., to remove the CD changer
2. Remove the screws (E1) x 6 pcs., to remove the CD changer
door panel.
3. Remove the screws (F1) x 2 pcs., to remove the control
panel motor.
FRONT PANEL SECTION
Perform steps 1 to 4 of the disassembly method to remove the
front panel.
front panel.
CD Changer
Door Panel
Door Panel
CD Changer
Door Panel
Door Panel
Control
Panel
Motor
Panel
Motor
Gear Box A
(E1)x1
ø2.6x10mm
ø2.6x10mm
(E1)x3
ø2.6x10mm
ø2.6x10mm
(E1)x2
ø2.6x10mm
ø2.6x10mm
(F1)x2
ø2x5mm
ø2x5mm
Motor PWB
Gear Box B
Control Panel
Figure 22-5
Main Belt
(C1)x1
(C1)x1
FF/REW Belt
(C2)x1
(C2)x1
Motor
(D1)x2
Ø 2.6 x 5mm
Ø 2.6 x 5mm
Motor