Read Sharp CD-E250 User Guide / Operation Manual online
03/2/17
CD-E250E(E)2.fm
20
CD-E250E
Radio
Listening to the radio (continued)
"
Memorising a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.
The backup function protects the memorised stations for a few
hours should there be a power failure or if the AC lead is discon-
nected.
"
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to
select the desired station.
select the desired station.
"
To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
set memory scan)
"
To erase entire preset memory
1
Perform steps 1 - 3 in "Tuning" on page 19.
2
Press the MEMORY/SET button to enter the preset tuning
saving mode.
saving mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store
that station in memory.
that station in memory.
If the "MEMORY" and preset number indicators go out before
the station is memorised, repeat the operation from step 2.
the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
memorised will be erased.
1
Press and hold down the PRESET ( or ) button.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
When the desired station is located, release the PRESET ( or
) button.
1
Press the ON/STAND-BY button to enter the stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the DISC
SKIP button, press the ON/STAND-BY button until "TUNER CL"
appears.
SKIP button, press the ON/STAND-BY button until "TUNER CL"
appears.
Click on the first or last page to see other CD-E250 service manuals if exist.