CD-E250 - Sharp Audio User Guide / Operation Manual. Page 22

Read Sharp CD-E250 User Guide / Operation Manual online

03/2/17
CD-E250E(E)3.fm
22
CD-E250E
T
a
pe Rec
o
rding
Recording to a cassette tape
Before recording:
!
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
!
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
!
The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
!
For recording, use only normal tapes. Do not use metal or
CrO  tapes.
!
Recording can be operated in the TAPE 2 compartment only.
The TAPE 1 compartment is for playback only.
"
Recording from a CD (CDs)  
You can record 3 CDs continuously.
Erase-prevention tab of cassette tapes:
!
When recording on a cassette tape, 
make sure that the erase-prevention 
tabs are not removed. Cassettes have 
removable tabs that prevent accidental 
recording or erasing.
!
To protect the recorded sound, remove 
the tab after recording. Cover the tab 
hole with adhesive tape to record on the 
tape without the tab.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be 
performed.
3
Press the CD button and load the desired disc.
4
Press one of the   1 -   3 buttons on the remote control to
select the disc to be recorded first.
5
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
6
Press the   /   button to start recording.
!
CD playback will start approximately 5 seconds after the 
tape starts.
!
Recording is started from the selected CD. When the play-
back of the last disc is finished or the end of the tape is 
reached, the CD and the cassette will stop automatically.
Side A
Tab for 
side B
Tab for 
side A
Page of 32
Display

Click on the first or last page to see other CD-E250 service manuals if exist.