Read Sharp CD-E250 User Guide / Operation Manual online
03/2/17
CD-E250E(E)2.fm
16
CD-E250E
CD Playb
ack
Listening to a CD (CDs) (continued)
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the button.
Press the button on the remote control.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
!
Do not place two CDs in one disc tray.
!
Do not play discs with special shapes (heart- or octagon-
shaped). It may cause malfunctions.
shaped). It may cause malfunctions.
!
Do not push the disc tray whilst it is moving.
!
Do not turn the disc tray by hand. This may cause malfunctions.
!
If the power fails whilst the tray is open, wait until the power is
restored.
restored.
!
If the disc tray is stopped with force, the unit will not function. If
this occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
this occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
!
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
unit away from the TV or radio.
!
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
skip or not play back.
"
To locate the beginning of a track
Notes:
!
You can locate the beginning of a track on one disc only.
!
You can skip to any track by pressing the
or
button
repeatedly until the desired track number appears.
"
To locate the desired portion
Notes:
!
Normal playback will resume when the
or
button is
released.
!
You can locate the desired portion on one disc only.
!
When the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
"END" will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
For audible fast forward:
Press and hold down the
button during playback.
For audible fast reverse:
Press and hold down the
button during playback.
Click on the first or last page to see other CD-E250 service manuals if exist.