Read Sharp CD-CH1500 (serv.man3) Service Manual online
– 15 –
CD-CH1500H/CD-CH1500W
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 4 and 8 of the disassembly method to
remove the tape mechanism.
remove the tape mechanism.
How to remove the record/playback and erase
heads (See Fig. 15-1)
heads (See Fig. 15-1)
playback head and three-dimensional head of the erasing
head can be removed.
head can be removed.
How to remove the pinch roller (See Fig. 15-2)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <A>, and remove the pinch roller (B1) x 2 pcs., in the
direction of the arrow <B>.
direction of the arrow <B>.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the belt (See Fig. 15-3)
1. Remove the motor.
2. Remove the main belt (C1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (C2) x 1 pc.
2. Remove the main belt (C1) x 1 pc., from the motor side.
3. Remove the FF/REW belt (C2) x 1 pc.
How to remove the motor (See Fig. 15-4)
1. Remove the belt.
2. Remove the screws (D1) x 2 pcs., to remove the motor.
2. Remove the screws (D1) x 2 pcs., to remove the motor.
(A1)x2
Ø2 x 6mm
Ø2 x 6mm
Record/
Playback
Head
Playback
Head
Erase
Head
Head
Pinch
Roller
(B1)x2
Roller
(B1)x2
<A>
Pinch
Roller
Pawl
Roller
Pawl
Pull
<B>
Pull
(Left)
<A>
Pinch
Roller
Pawl
Roller
Pawl
Pull
<B>
Pull
(Right)
Main Belt
(C1)x1
(C1)x1
FF/REW Belt
(C2)x1
(C2)x1
Motor
Cam Gear
(D1)x2
Ø 2.6 x 5mm
Ø 2.6 x 5mm
Motor
Figure 15-1
Figure 15-2
Figure 15-3
Figure 15-4