CD-C661H - Sharp Audio User Guide / Operation Manual. Page 25

Read Sharp CD-C661H User Guide / Operation Manual online

HK
<P=001>
USING EXTERNAL UNITS 
CD
DIGITAL
OUT
Video/Auxiliary (Audio signal) input 
To listen to or record signals from external sources
through this unit:
1
Use a separately available RCA lead to connect the desired
external unit to the VIDEO/AUX sockets.
(red 
 right channel, white 
 left channel)
When using video equipment (Laser Disc player or VCR), be
sure to connect the audio output to this unit and the video
output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Operate the external unit.
5
To record the sound from the external unit, perform steps 2
- 4 of the "Recording from the built-in radio" section on page
22.
Note:
To prevent hum interference, do not place this unit near a
television receiver.
CD digital output (optical)
The CD digital signal from this unit can be recorded by
other DAT or MiniDisc recorders.
1
Remove the CD DIGITAL OUT socket cover.
2
Use a commercially available digital cable to connect the unit
to the OPTICAL IN socket of a MiniDisc recorder or a DAT.
3
Put the external unit in the recording mode.
4
Play a CD on this unit.
Note:
Only CD signals can be output.
Headphones
Before plugging in or unplugging the headphones, make sure
the volume level is reduced.
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and are between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
When headphones are connected, the speakers are discon-
nected automatically. Adjust the VOLUME control for the
desired volume.
To the line output socket
RCA
lead
Commercially available digital cable
CD-C661H(SUK) TINSE0264AWZZ
24
Page of 28
Display

Click on the first or last page to see other CD-C661H service manuals if exist.