Read Sharp CD-C661H User Guide / Operation Manual online
<P=003>
HOW TO USE THE BUILT-IN TIMER
■
Timer playback
●
Before setting the timer, make sure that the clock setting is
correct. (Page 7)
correct. (Page 7)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND), TAPE (1
V
2) or VIDEO/AUX
button to select the desired function.
3
Press the TIMER/SLEEP button repeatedly until a green "
f
"
is displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour
start time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, and the timer set
indicator will light up.
indicator will light up.
6
When the preset time is reached, the volume will increase
gradually until it reaches the volume you were listening to
before turning off the unit.
gradually until it reaches the volume you were listening to
before turning off the unit.
7
If you select CD or TAPE during timer playback, the power
will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.
will be turned off after the tape or CD is finished playing back.
If you select TUNER or VIDEO/AUX, the power will be turned
off one hour later.
■
Timer recording
1
Press the ON/STAND-BY button to turn the power on.
●
Load a cassette for recording into the TAPE 2 cassette com-
partment.
partment.
2
Press the TUNER (BAND) or VIDEO/AUX button to select the
desired function.
desired function.
3
Press the TIMER/SLEEP button repeatedly until a red "
f
" is
displayed.
●
The timer set indicator will flash.
4
Press the TUNING/TIME (
X
or
W
) button to set the hour start
time, then press the MEMORY/SET button.
5
Press the TUNING/TIME (
X
or
W
) button to set the minute
start time, then press the MEMORY/SET button.
●
The power will be automatically turned off, and the timer set
indicator will light up.
indicator will light up.
6
When the recording tape reaches its end, the timer recording
will end, and the power will be turned off.
will end, and the power will be turned off.
●
When timer recording starts, the volume will increase gradually
until it reaches the volume you were listening to before turning
off the unit.
until it reaches the volume you were listening to before turning
off the unit.
To cancel timer operation:
Press the ON/STAND-BY button to turn the power on.
To change the programmed contents:
Start again from step 1.
Note:
●
Once the time is set, the setting will be retained until a new
time is entered.
time is entered.
■
Sleep operation
The radio, compact disc and cassette deck can all be
turned off automatically.
turned off automatically.
1
Play back the desired sound source.
2
Press the TIMER/SLEEP button repeatedly until
"SLEEP" is displayed.
"SLEEP" is displayed.
To change the sleep time:
Whilst the sleep time is displayed, press the TUN-
ING/TIME (
ING/TIME (
X
or
W
) button to adjust the time.
(Maximum: 3 hours - Minimum: 1 minute)
The amount of sleep time can also be changed during
the sleep operation.
The amount of sleep time can also be changed during
the sleep operation.
●
3 hours - 5 minutes
→
5-minute intervals
●
5 minutes - 1 minute
→
1-minute intervals
3
Press the MEMORY/SET button.
4
The unit will turn off automatically after the preset
sleep time has elapsed.
sleep time has elapsed.
Note:
●
Once the sleep time is set, it will remain the same
duration until the setting is changed.
duration until the setting is changed.
To confirm the remaining sleep time:
Press the TIMER/SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button to enter the stand-by
mode.
mode.
(Main unit operation)
ON/
STAND-BY
STAND-BY
CD
TUNER
(BAND)
(BAND)
VIDEO/
AUX
TAPE
(1 2)
(1 2)
MEMORY/SET
TIMER/
SLEEP
SLEEP
TUNING/
TIME
( )
TIME
( )
3
4
5
CD-C661H(SUK) TINSE0264AWZZ
23
Click on the first or last page to see other CD-C661H service manuals if exist.