Read Sharp CD-C491H User Guide / Operation Manual online
HOW TO USE THE BUILT-IN TIMER
VOLUME
Jog dial
TUNING
( )
( )
FUNCTION
MEMORY
TIMER
REVERSE
MODE
MODE
ON/
STAND-BY
STAND-BY
2
3
4
5
7
8
6
To confirm the timer setting:
Press the TIMER button once.
●
The turn-on time and the turn-off time will be displayed.
To cancel timer operation:
Press the TIMER button repeatedly to turn off the timer, "
f
PLAY" will go out.
To change the programmed contents:
Start again from step 1.
To stop playback during timer playback:
Press the ON/STAND-BY button to enter the stand-by mode.
●
Before setting the timer, make sure that the clock setting
is correct. (Page 10)
is correct. (Page 10)
●
Load the compact disc or cassette for playback, that you
want to control with the timer.
want to control with the timer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button once to turn on the timer mode,
"
"
f
PLAY" will appear. At this point, make sure that "
f
REC" is not lit.
3
Within 10 seconds, press the MEMORY button.
●
If more than 10 seconds have passed, start again from
step 1.
step 1.
4
Turn the jog dial to set the hour at which to start, and
then press the MEMORY button.
then press the MEMORY button.
5
Turn the jog dial to set the minute at which to start, and
then press the MEMORY button.
then press the MEMORY button.
6
Set the hour and minute for the OFF time, the same as
described in steps 4 - 5.
described in steps 4 - 5.
7
Press the FUNCTION button to select the desired function
(CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD 2,
or VCR 2), and then press the MEMORY button.
(CD, TUNER, TAPE 1, TAPE 2, DVD 1, VCR 1, DVD 2,
or VCR 2), and then press the MEMORY button.
●
When the TUNER or TAPE 2 function is selected, go to
step 8.
When any other function is selected, go to step 9.
step 8.
When any other function is selected, go to step 9.
8
When TUNER is selected
Turn the jog dial to select a previously programmed radio
station, and then press the MEMORY button.
station, and then press the MEMORY button.
When TAPE 2 is selected
Press the REVERSE MODE button to select the reverse
mode, and then press the MEMORY button.
mode, and then press the MEMORY button.
9
Rotate the VOLUME control to adjust the sound volume,
and then press the MEMORY button.
and then press the MEMORY button.
10
After the setting has been performed whilst the unit is on,
press the ON/STAND-BY button to enter the stand-by
mode.
press the ON/STAND-BY button to enter the stand-by
mode.
●
The unit will display the time.
11
When the timer start time is reached, timer playback will
start.
start.
●
The volume will increase until it is at the volume level
when the timer was set.
when the timer was set.
12
When the timer end time is reached, timer playback will
stop.
stop.
●
"
f
PLAY" will disappear, and the timer mode will be can-
celled. The unit will enter the stand-by mode.
Notes:
●
Once the time is set, the setting is retained until a new
time is programmed.
time is programmed.
●
The timer cannot control the component connected to the
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
DVD 1, DVD 2, VCR 1/AUX 1 and VCR 2/AUX 2 sockets.
■
Timer playback
CD-C491H(SUK) TINSE0229AWZZ
36
Click on the first or last page to see other CD-C491H service manuals if exist.