Read Sharp CD-C491H User Guide / Operation Manual online
(Continued)
The best sound will be achieved by placing the front speak-
ers, centre speaker and surround speakers at the same dis-
tance from the listener.
When some of the speakers are at a different distance from
the listener, you can select a speaker delay to make it seem
as though the speaker distances are the same.
(Factory-shipped settings: CENTER
ers, centre speaker and surround speakers at the same dis-
tance from the listener.
When some of the speakers are at a different distance from
the listener, you can select a speaker delay to make it seem
as though the speaker distances are the same.
(Factory-shipped settings: CENTER
→
0 ms, SURROUND
→
5 ms)
If the settings need to be changed due to the type of sound
source being played or the conditions in the room, change
them as follows.
source being played or the conditions in the room, change
them as follows.
1
Press the MENU button repeatedly to make "SP DELAY"
appear.
appear.
2
Within 10 seconds, press the ITEM button to select "CEN-
TER" or "SURROUND".
CENTER: To delay the sound from the centre speaker
SURROUND: To delay the sound from the surround
speakers
TER" or "SURROUND".
CENTER: To delay the sound from the centre speaker
SURROUND: To delay the sound from the surround
speakers
●
The selected speaker indicator(s) will flash.
3
Within 10 seconds, use the jog dial or the SET UP (
W
or
X
) button on the remote control to select a value.
Adjustable range
CENTER: 0 ms - 5 ms
SURROUND: 0 ms - 15 ms
(Can be changed in 1 ms steps.)
CENTER: 0 ms - 5 ms
SURROUND: 0 ms - 15 ms
(Can be changed in 1 ms steps.)
Notes:
●
As a guide for setting the correct delay time, 1 ms is equal
to approximately 30 cm (12") from where the selected
speakers are placed further away from the listener than
the typical location.
to approximately 30 cm (12") from where the selected
speakers are placed further away from the listener than
the typical location.
●
If the delay time for the surround speakers is set to a large
value, a large sound space will be created. If it is set to
a small value, the sound space will be small and intimate.
value, a large sound space will be created. If it is set to
a small value, the sound space will be small and intimate.
■
Speaker delay setting
Jog
dial
dial
ITEM
ITEM
MENU
SET UP
MENU
0
1
4
5
0
1
14
15
1
2,3
The output level of each speaker can be adjusted.
1
Press the MENU button repeatedly to make "SP LEVEL"
appear.
appear.
2
Within 10 seconds, press the ITEM button repeatedly to
s e l e c t t h e s p e a k e r ( CE N T E R, RS UR RO UN D,
LSURROUND or S-WOOFER) you want to adjust.
s e l e c t t h e s p e a k e r ( CE N T E R, RS UR RO UN D,
LSURROUND or S-WOOFER) you want to adjust.
●
The selected speaker indicator will flash.
3
Within 10 seconds, use the jog dial or the SET UP (
W
or
X
) button on the remote control to adjust the level.
●
You can change the level within a range of +7dB to –7dB,
in 1dB steps.
in 1dB steps.
■
Speaker level setting
1
2,3
CD-C491H(SUK) TINSE0229AWZZ
32
Click on the first or last page to see other CD-C491H service manuals if exist.