Read Sharp CD-C491H User Guide / Operation Manual online
(Continued)
■
Test tone
You can check (and adjust) the speaker level by listening to
the sound output from each speaker individually, whilst stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
the sound output from each speaker individually, whilst stand-
ing at the actual listening position in the room.
The speaker level can be adjusted using the remote control.
1
Press the MENU button repeatedly to make "TEST
TONE" appear.
TONE" appear.
2
Within 10 seconds, press the ITEM button.
●
The test tone will be heard from each speaker, in order,
at about 5 second intervals.
at about 5 second intervals.
FRONT LEFT
↓
CENTER
↓
FRONT RIGHT
↓
RSURROUND
↓
LSURROUND
↓
S-WOOFER
●
When the test tone is being output, the indicator for that
speaker will flash.
speaker will flash.
●
The test tone will be heard until the current menu selection
is changed by pressing the MENU button again, or by
selecting some other function.
is changed by pressing the MENU button again, or by
selecting some other function.
3
To adjust the speaker level whilst the test tone is being
output from a particular speaker, press the SET UP (
output from a particular speaker, press the SET UP (
W
or
X
) button.
●
The speaker level can be adjusted within a range of +7dB
to -7dB, in 1dB steps.
to -7dB, in 1dB steps.
Notes:
●
If "NO" is selected for any individual speaker’s size setting
(page 31), the test tone will not be heard from that
speaker.
(page 31), the test tone will not be heard from that
speaker.
●
Please note that the front left and front right speaker levels
cannot be adjusted using this method.
cannot be adjusted using this method.
Jog
dial
dial
ITEM
ITEM
MENU
SET UP
MENU
1
3
2
CD-C491H(SUK) TINSE0229AWZZ
34
Click on the first or last page to see other CD-C491H service manuals if exist.