Read Sharp CD-BA250 User Guide / Operation Manual online
21
CD-BA250H(E)3.fm
01/2/8
Radio
- Lis
te
n
ing
t
o
t
h
e
Memor
ised S
tat
ion -
Listening to the Memorised Station
„
Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
ton. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
a power failure or the AC power lead disconnection.
„
To recall a memorised station
„
To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
„
To erase entire preset memory
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
mode.
3
Within 30 seconds, press the
PRESET or PRESET
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
station in memory.
If the "MEMORY" and preset number indicators go out before the station is mem-
orised, repeat the operation from step 2.
orised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
be erased.
Press the
PRESET or PRESET
button for less than
0.5 seconds to select the desired station.
Preset channel
Frequency and frequency band
This can be operated by pressing the PRESET ( or ) button on the remote
control.
control.
1
Press the
PRESET or PRESET
button for more
than 0.5 seconds.
z
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
quentially, for 5 seconds each.
z
This can be operated by pressing the PRESET ( or ) button on the remote
control.
control.
2
Press the
PRESET or PRESET
button again when
the desired station is located.
1
Press the ON/STAND-BY button to enter the power stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button,
press the ON/STAND-BY button until "TUNER CL" appears.
press the ON/STAND-BY button until "TUNER CL" appears.
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-BA250 service manuals if exist.