Read Sharp CD-BA250 User Guide / Operation Manual online
20
CD-BA250H(E)2.fm
01/2/8
Radio
- Liste
n
in
g
to
the R
a
dio -
Listening to the Radio
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
z
"
" will appear when an FM broadcast is in stereo.
z
If the FM reception is weak, press the TUNER (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
frequency band (FM or AM).
3
Press the TUNING/TIME ( or ) button to tune in to the desired
station.
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the de-
sired station.
sired station.
Auto tuning:
When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
will start automatically and the tuner will stop at the first receivable broadcast sta-
tion.
Notes:
z
When radio interference occurs, auto scan tuning may stop automatically at
that point.
that point.
z
Auto scan tuning will skip weak signal stations.
z
To stop the auto tuning, press the TUNING/TIME button again.
z
When an RDS (Radio Data System) station is tuned in, the frequency will be
displayed first, and then the RDS indicator will light. Finally, the station name
will appear.
displayed first, and then the RDS indicator will light. Finally, the station name
will appear.
z
Full auto tuning can be achieved for RDS stations "ASPM", see page 24.
FM stereo mode indicator
FM stereo receiving indicator
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Click on the first or last page to see other CD-BA250 service manuals if exist.