Read Sharp CD-BA2010 (serv.man9) Service Manual online
– 3 –
CD-BA2010H
General
Power source:
AC 230 V, 50 Hz
Power consumption: 154 W
Dimensions:
Dimensions:
Width; 270 mm (10-5/8")
Height; 330 mm (13")
Depth; 332 mm (13-1/16")
Height; 330 mm (13")
Depth; 332 mm (13-1/16")
Weight:
8.2 kg (18.0 lbs.)
Amplifier section
Output power:
(Except for U.K.)
(Except for U.K.)
PMPO; 668 W
MPO; 334 W (167 W + 167 W)
(DIN 45 324)
[Main speaker (woofer, tweeter and
super tweeter);
134 W (67 W + 67 W)
Subwoofer;
200 W (100 W + 100 W)]
RMS; 200 W (100 W + 100 W)
(DIN 45 324)
[Main speaker (woofer, tweeter and
super tweeter);
80 W (40 W + 40 W)
Subwoofer;
120 W (60 W + 60 W)]
RMS; 184 W (92 W + 92 W)
(DIN 45 500)
[Main speaker (woofer, tweeter and
super tweeter);
74 W (37 W + 37 W)
Subwoofer;
110 W (55 W + 55 W)]
MPO; 334 W (167 W + 167 W)
(DIN 45 324)
[Main speaker (woofer, tweeter and
super tweeter);
134 W (67 W + 67 W)
Subwoofer;
200 W (100 W + 100 W)]
RMS; 200 W (100 W + 100 W)
(DIN 45 324)
[Main speaker (woofer, tweeter and
super tweeter);
80 W (40 W + 40 W)
Subwoofer;
120 W (60 W + 60 W)]
RMS; 184 W (92 W + 92 W)
(DIN 45 500)
[Main speaker (woofer, tweeter and
super tweeter);
74 W (37 W + 37 W)
Subwoofer;
110 W (55 W + 55 W)]
Output power:
(For U.K.)
(For U.K.)
RMS; 200 W (100 W + 100 W)
(10 % T.H.D.)
[Main speaker (woofer, tweeter and
super tweeter);
80 W (40 W + 40 W)
Subwoofer;
120 W (60 W + 60 W)]
RMS; 184 W (92 W + 92 W)
(0.9 % T.H.D.)
[Main speaker (woofer, tweeter and
super tweeter);
74 W (37 W + 37 W)
Subwoofer;
110 W (55 W + 55 W)]
(10 % T.H.D.)
[Main speaker (woofer, tweeter and
super tweeter);
80 W (40 W + 40 W)
Subwoofer;
120 W (60 W + 60 W)]
RMS; 184 W (92 W + 92 W)
(0.9 % T.H.D.)
[Main speaker (woofer, tweeter and
super tweeter);
74 W (37 W + 37 W)
Subwoofer;
110 W (55 W + 55 W)]
Output terminals:
Speakers; 6 ohms
Headphones; 16-50 ohms
(recommended; 32 ohms)
Headphones; 16-50 ohms
(recommended; 32 ohms)
Input terminals:
Video/Auxiliary (audio signal);
500 mV/47 kohms
500 mV/47 kohms
Compact disc player section
Type:
3-disc multi-play compact disc player
Signal readout:
Non-contact, 3-beam semiconductor
laser pickup
laser pickup
D/A converter:
1-bit D/A converter
Frequency response: 20 - 20,000 Hz
Dynamic range:
Dynamic range:
90 dB (1 kHz)
Tuner section
Frequency range:
FM; 87.5-108 MHz
AM; 522-1,620 kHz
AM; 522-1,620 kHz
Cassette deck section
Frequency response: 50-14,000 Hz (Normal tape)
Signal/noise ratio:
Signal/noise ratio:
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter:
0.35 % (DIN 45 511)
(Except for U.K.)
Wow and flutter:
Wow and flutter:
0.3 % (WRMS)
(For U.K.)
Type:
4-way type [16 cm (6-5/16") subwoofer,
10 cm (4") woofer,
5 cm (2") tweeter and super tweeter]
10 cm (4") woofer,
5 cm (2") tweeter and super tweeter]
Maximum input
power:
power:
200 W
Rated input power:
100 W
Impedance:
6 ohms
Dimensions:
Width; 250 mm (9-7/8")
Height; 330 mm (13")
Depth; 240 mm (9-7/16")
Height; 330 mm (13")
Depth; 240 mm (9-7/16")
Weight:
4.7 kg (10.3 lbs.)/each
Specifications for this model are subject to change without
prior notice.
prior notice.
SPECIFICATIONS
CD-BA2010H
CP-BA2010H
FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.
TO THE OPERATION MANUAL.
IMPORTANT SERVICE NOTES (FOR U.K. ONLY)
Before returning the unit to the customer after completion of a
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
repair or adjustment it is necessary for the following withstand
voltage test to be applied to ensure the unit is safe for the
customer to use.
Setting of Withstanding Voltage Tester and set.
Set name
set value
Withstanding Voltage Tester
Test voltage
4,240 VPEAK
3,000 VRMS
3,000 VRMS
Set time
6 secs
Set current (Cutoff current)
4 mA
Unit
Judgment
OK: The “GOOD” lamp lights.
NG: The “NG” lamp lights and the buzzer sounds.
NG: The “NG” lamp lights and the buzzer sounds.
SHORT-CIRCUIT
AC POWER
SUPPLY CORD
AC POWER
SUPPLY CORD
CONNECT THE PROBE
TO GND
TO GND
OF CHASSIS
SCREW
PROBE
AC
UNIT
WITHSTANDING
VOLTAGE TESTER
VOLTAGE TESTER
+
-
OUT
CHASSIS SCREW
Click on the first or last page to see other CD-BA2010 (serv.man9) service manuals if exist.