Read Sharp CD-BA1300 User Guide / Operation Manual online
7
(Continued)
„
Connecting the AC power lead
Connect the AC power lead to the AC INPUT socket, then
connect the AC power lead plug to an AC socket.
connect the AC power lead plug to an AC socket.
Notes:
z
Unplug the AC power lead from the AC socket if the unit
will not be in use for a prolonged period of time.
will not be in use for a prolonged period of time.
z
Never use a power lead other than the one supplied. Use
of a power lead other than the one supplied may cause
an electric shock or fire.
of a power lead other than the one supplied may cause
an electric shock or fire.
„
Demo mode
When the AC power lead is first connected, the unit will
enter the demonstration mode.
enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the stand-by mode (demonstration
mode), press the EQUALIZER/X-BASS/DEMO button.
When the unit is in the stand-by mode (demonstration
mode), press the EQUALIZER/X-BASS/DEMO button.
z
The demonstration mode will be cancelled and the unit
will enter the low power consumption mode.
will enter the low power consumption mode.
To return to the demonstration mode:
When the unit is in the stand-by mode, press the EQUAL-
IZER/X-BASS/DEMO button again.
When the unit is in the stand-by mode, press the EQUAL-
IZER/X-BASS/DEMO button again.
Notes:
z
When the unit is in the low power consumption mode, the
display will disappear.
display will disappear.
z
When the power is on, the EQUALIZER/X-BASS/DEMO
button can be used to select the extra bass mode.
button can be used to select the extra bass mode.
„
Remote control
z
When inserting or removing the batteries, push them
towards the battery terminals.
towards the battery terminals.
z
Installing the batteries incorrectly may cause the unit to
malfunction.
malfunction.
Precautions for battery use:
z
Insert the batteries according to the direction indicated in
the battery compartment.
the battery compartment.
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if they are weak or if the unit will
not be used for long periods of time. This will prevent
potential damage due to battery leakage.
not be used for long periods of time. This will prevent
potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Do not use rechargeable batteries (nickel-cadmium battery,
etc.).
Notes concerning use:
z
Replace the batteries if the operating distance is reduced
or if the operation becomes erratic.
or if the operation becomes erratic.
z
Periodically clean the transmitter LED on the remote con-
trol and the sensor on the main unit with a soft cloth.
trol and the sensor on the main unit with a soft cloth.
z
Exposing the sensor on the main unit to strong light may
interfere with operation. Change the lighting or the direc-
tion of the unit.
interfere with operation. Change the lighting or the direc-
tion of the unit.
z
Keep the remote control away from moisture, excessive
heat, shock, and vibrations.
heat, shock, and vibrations.
To AC INPUT
To an AC socket
(Main unit operation)
AC 230 V, 50 Hz
z
2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar)
z
Batteries are not included.
15
15
0.2 m - 6 m
(8" - 20')
(8" - 20')
Click on the first or last page to see other CD-BA1300 service manuals if exist.