Read Sharp CD-BA1300 User Guide / Operation Manual online
6
PREPARATION FOR USE
„
Aerial connection
Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the stron-
gest signal can be received.
Connect the FM aerial wire to the FM 75 OHMS socket and
position the FM aerial wire in the direction where the stron-
gest signal can be received.
Supplied AM loop aerial
Connect the AM loop aerial to the AM LOOP socket. Posi-
tion the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Connect the AM loop aerial to the AM LOOP socket. Posi-
tion the AM loop aerial for optimum reception. Place the AM
loop aerial on a shelf, etc., or attach it to a stand or a wall
with screws (not supplied).
Notes:
z
Do not place the aerial on the main unit as it may result in
noise pickup from the internal digital electronics. Place
the aerial away from the unit for better reception.
noise pickup from the internal digital electronics. Place
the aerial away from the unit for better reception.
z
If the AM loop aerial and the FM aerial wire are placed
near the AC power lead, interference may result.
near the AC power lead, interference may result.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Use an external FM aerial if you require better reception.
Consult your dealer.
„
Speaker connection
Connect each speaker wire to the SPEAKER terminals as
shown.
Use speakers with an impedance of 6 ohms or more, as
lower impedance speakers can damage the unit.
shown.
Use speakers with an impedance of 6 ohms or more, as
lower impedance speakers can damage the unit.
z
Connect the black wire to the minus (-) terminal, and the
red wire to the plus (+) terminal.
red wire to the plus (+) terminal.
Caution:
z
Do not mistake the right channel for the left channel
when connecting the speakers to the unit. The right
speaker is the one on the right side when you are facing
the front of the unit.
when connecting the speakers to the unit. The right
speaker is the one on the right side when you are facing
the front of the unit.
z
Do not let bare speaker wires touch each other as this
may damage the amplifier and/or speakers.
may damage the amplifier and/or speakers.
z
Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
bass reflex ducts.
z
Do not stand or sit on the speakers. If the speakers fall or
collapse, you may be injured.
collapse, you may be injured.
Note:
z
The speaker grille is not removable.
z
Unplug the AC power lead from the AC socket before
connecting or disconnecting any component.
connecting or disconnecting any component.
1
2
3
AM loop
aerial
aerial
FM aerial
External
FM aerial
FM aerial
Right speaker
Left speaker
2
1
3
Red
Black
Black
Red
Click on the first or last page to see other CD-BA1300 service manuals if exist.