AY-XP08CR (serv.man14) - Sharp Air Conditioner Service Manual (repair manual). Page 37

37

DUST  SENSOR

GAS  SENSOR

THERMISTOR

CN101 and CN102

5. Remove 2 connectors.

6. Pull the board.

1. Remove 3 screws fixing motors.

2. Turn the cap area of the drain hose counterclockwise,

and remove it from the drain pan.
During installation, turn the drain hose to the state of
the “engagement position”.
After reinstallation, verify that it is securely fastened.

How to remove the horizontal louver
Slightly pull down the hinge area, deflect the louver, and
unhook it from the hinge. Remove the shaft from each of
the left and right sides.

Drain pan

Drain Hose

Groove

Projection

To disconned

To reconnect

How to remove the HI VOLTAGE UNIT.
1. Remove  the HIGH VOLTAGE UNIT.

(Press and spread the hook, and HI VOLTAGE will
be ready for removal.)

How to remove the DUST SENSOR, the THERMISTOR
and  the GAS SENSOR.
Remove the DUST SENSOR, the THERMISTOR, and
the GAS SENSOR.

(Press and spread the hook,and GAS SENSOR  will be
ready for removal)

How to remove the display board unit 2.
The display board unit 2 is pushed in the direction of
arrow    1   .
And it is made to slide in the direction of arrow   2   , and
remove.

display  board  unit2

1

2