Read Sharp AY-XP08CR (serv.man14) Service Manual online
36
AY-XP08CR
AY-XP10CR
AY-XP13CR
AY-XP10CR
AY-XP13CR
[Cautionary points for assembling the fan]
a. When inserting the motor shaft into the metal fan
a. When inserting the motor shaft into the metal fan
boss, take care to prevent injuring the inner surface of
the metal fan boss.
the metal fan boss.
b. Before fastening the motor shaft and fan, insert the
motor shaft into the metal fan boss until it stops.
How to remove the display cover
1. Push the center of display cover from the back.
2. Slide the display cover to the right.
2. Slide the display cover to the right.
How to assemble the display cover
2. After the left half is inseted completely, press the
display cover and snap in the 2 or 3 hooks on the
right.
right.
How to remove the control board
1. Remove the photo detector unit.
(Press and spread the upper hook, and the photo
detector unit will be ready for removal.)
detector unit will be ready for removal.)
2. Remove the screw fixing the terminal board.
Fan motor
Motor shaft
Fan boss
Cross flow fan
1
2
3. Remove 2 screws fixing the board (transformer).
1. Slide the left end of the display cover through 2 hooks
on the front panel along the guide from the center of
the front panel.
the front panel.
4. Remove 5 connectors. And cut off a fixing band.
CN8
CN10
CN6
CN9
CN7
Click on the first or last page to see other AY-XP08CR (serv.man14) service manuals if exist.