Read Sharp AE-XM24CR (serv.man15) Service Manual online
68
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
8. Unscrew the 13 screws fixing the rear cabinet then
remove it.
1 screw is at the left.
5 screws are at the right.
7 screw is at the rear.
5 screws are at the right.
7 screw is at the rear.
12 .Unscrew the 3 screws fixing the coil for PFC then
remove it
Note : When the coil re-install, silicone grease must
be paste to the back face of the coil.
9. Unfasten the nut fixing the propeller fan then remove
it. Unscrew the 5 screws fixing the control box then
remove it.
remove it.
1 screw is at the right.
4 screws are at the front.
4 screws are at the front.
Note : How to disassemble of control box assembly
is shown in step 15 – 23.
10. Unscrew the 2 screws fixing the fan motor angle
assembly then remove it with lifting up as unhook
the hook on the base pan.
Unscrew the 3 screws fixing the fan bulkhead
assembly then remove.
the hook on the base pan.
Unscrew the 3 screws fixing the fan bulkhead
assembly then remove.
11. Unscrew the 4 screws fixing the fan motor then
remove it.
13. Remove the 3 strings on the compressor cover A
then remove it
14. Remove the 6 thermistors (A3AEXM24CR) or 5
thermistors (AE-XM18CR) on copper tube.
Note : Caution to position when re-installing.
Refer to page 74
(Mounting position of thermistors and expansion valves)
(Mounting position of thermistors and expansion valves)
TH7 (BROWN) : (AE-XM24CR)
TH6 (WHITE) : (AE-XM18CR)
TH6 (WHITE) : (AE-XM18CR)
TH6 (WHITE) : (AE-XM24CR)
TH5 (BLUE) : (AE-XM18CR)
TH5 (BLUE) : (AE-XM18CR)
TH5 (BLUE) : (AE-XM24CR
only)
only)
TH3 (GREEN)
TH4 (BLACK)
TH2 (ORANGE)
Click on the first or last page to see other AE-XM24CR (serv.man15) service manuals if exist.