Read Sharp AE-XM24CR (serv.man15) Service Manual online
70
AY-XM7/9/12CR
AY-XPM7/9/12CR
AE-XM18/24CR
AY-XPM7/9/12CR
AE-XM18/24CR
21. Disconnect the 6 terminals(IN+,IN-,L+,L-,OUT+,
OUT-) and 1 connector (CN13) on the active filter.
And unscrew the 2 screws fixing the active filter and
remove it.
And unscrew the 2 screws fixing the active filter and
remove it.
Note : When the active filter re-install, silicone
grease must be paste to the back face of the
active filter.
active filter.
22. Unscrew the 4 screws fixing the heat sink
Note : Seal the 4 burring holes with silicone sealer
Note : Seal the 4 burring holes with silicone sealer
before re-installing.
23. Disconnect the 5 terminals(P(+),N(-),U,V,W) and 2
connectors (CN5A,CN14) on the power transistor
module (IPM). And unscrew the 4 screws fixing the
power module and remove it.
module (IPM). And unscrew the 4 screws fixing the
power module and remove it.
Note : When the power module re-install, silicone
grease must be paste to the back face of the
power module.
power module.
Click on the first or last page to see other AE-XM24CR (serv.man15) service manuals if exist.